Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks for the reminder that testing a device with a known power source can save a lot of time and money. This symptom had me going. I don’t know if I would have thought to remove the lights and simply connect them to the battery to see if they were the cause. Well done!
the other thing I am...
I had that problem some years ago. I took the fuel shut off solenoid apart and cleaned it. A speck of dirt will cause them to stick open. Once it was cleaned, it’s been working fine. While I was having that problem I got tired of opening the hood to reset the manual shut off. I installed a...
Getting ready for the Jefferson Highway Convoy in October.
Painted the exterior, installed AC in the cab, re-worked the generator fuel system,
still on the “to do list”: replace stereo speakers in the cab, stencils, oil change and other misc. maintenance stuff.
I'm not sure what plans they have. I have visited there garage in Traverse City, Michigan. These are down to earth folks. Give them a call: 800-922-4050...
Hi guys, I'm not hijacking this thread, but I have a similar problem with a friends M934 (1987 with ABS). This truck has demons in it! The original symptom was, when we turn the battery switch to on, the starter starts cranking (run, start switch is off). Also no gauges or lights. After...
I had this problem on my 934. It kept loos prime. I installed an electric fuel pump right at the tank to push fuel through the system. After I turned the pump on I found a line on the fuel pump with a hire-line crack. I replaced the plastic line with copper tubing… It now holds a prime for...
When I drove mine home I had three good friends and a chase truck pulling a Uhaul trailer stuffed with tool and fluids. Faith played a roll but planning didn’t hurt!
I heard this too. Fuzzy, can you post a picture of the mix label on the can you used for the tan? It gives the colors and amount they us to achieve the color. It would really help me out… Thanks
Hey Fuzzy, do you have the mix code for the paint in this picture? I want to give my M934 a fresh coat.
I intend to rent a sprayer in stead of buying one. You can rent a professional grade unit for what you pay for a crappy one from China.
I’ll be there. The guy I share space with just made a big buy from an estate. We’ll be bringing as much stuff as we can load out. Possibly a pallet or two of ammo cans, a mule and a 151A2. We’re on the outside between the roads near the restrooms.
You can run at idle in first gear, low range and it will go about as fast as you walk. I used mine In parades and just let it crawl. I rarely had to adjust my speed. If the parade stoped, I Just pushed in the clutch. When the parade resumed, I just let out the clutch. I never had give it any gas...
Welcome from Michigan! Stick around, you’re about to meet some really great folks. There is a wealth of knowledge here. BTW, that’s a good looking truck.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!