Search results

Any updates?

Thought I'd share some pictures of our Fall M151 ride in WV. Overall the weather was very nice and we had an excellent time. Hats off to my friend Blake for planning the routes. We met up early after noon on 10/23 and headed back for home on the morning of 10/27.

Have you verified that the Master Cylinder is not leaking? Or, any of the wheel cylinders? Or, any other part of the brake systerm? Lines, fittings, etc.? When you apply the brakes, is the pedal holding or does it slowly make it's way to the floor board? How about your wheel bearing seals...

How did you adjust the brakes? Pretty sure the manual states to tighten the brakes until you can not turn the wheel by hand. Back off the adjuster 11 clicks. Did you do this?

Ohio has a large MV community. If this guy is legit, I'd think SS members from that area would be able to verify his credibility.

Also you have spark. Good spark? NOS coil or China chrome model?

I'd test the starter switch and see if it's working. Also, did your mechanic set the float level properly? How about the fuel pump? Are you getting good pressure to the carb?

If you're using 51R batteries, this is a very well built hold down. Works in M38 and M151 as well.

Hello. Per my PM back to you, if you (or someone else) can provide a tracing of the gasket from the part, we can scan that and create a dxf file for our router. Maybe use a heavy paper and a accurate tracing and I think we'll be business. Guy

We have a CNC router with a knife head option. If I had a gasket (or part) to copy, we could probably make gaskets.