Search results

I put tools and a couple LMTV wheels/tires in the bed of my F-450 and down the road she went happily. Dave

I purchased a hard copy, the 13&P together, in two volumes for $25 off fleabay a couple years ago when I got mine. But hadn't looked for it on PDFs. Dave

Could it be "twisting" in the section that was extended? Any pics of the engineering? Dave

Nice work and thanks for sharing. Dave

Some heavy equipment uses this technic to vacuum dust out of the air intake housing. Dave

http://www.allisontransmission.com/docs/default-source/specification-sheets/int3700_sa5343(201306)blk.pdf?sfvrsn=2 and the Allison isn't rated for that kind of power even if it would bolt up. Dave

http://www.cat.com/en_US/products/new/power-systems/industrial/industrial-diesel-engines-highly-regulated/18375173.html I doubt it'll fit. It's tight and the C15 is big, heavy and powerful...

Nice!

The axle ends with the gearing need lube. The rear axle shares lubricant with rear differential, as long as it's full to spec the gears will get lube. However, the front axle ends are not shared with front differential. It needs to be checked regularly and to not run dry. I've talked to a few...

I've had my LMTV just over two years. I've done no modifications to it. I changed the engine oil, diffs and front axle ends. I'm going to change transmission fluid to Dexron 3 or equal. The truck rides well on the new Goodyears that were on it.the little Cat doesn't do too bad here in the...

Sorry, yes they are the new ones. Really bright and wide. They are not the heated version though. Dave

Recaro's would be sweet!

Maybe a more comfortable seat to adjust for posture but like Suprman stated, the ride isn't bad at all. Dave

I put the other Truck-Lites on my HET and do like them.

ive had those on my LMTV for a couple years now. I like em. Dave

Mine cycled correctly as well they just stopped in middle of windshield. It's been two years since I've done it, but I did take a nut loose at the motor rotated the wipers to correct stopped position. Put nut back then turned wipers back on and they were correct. I don't recall but one nut in...

I had to go to the motor and unscrew the retaining nut, rotate them to the correct position then reattach. Dave

Ive considered pulling the LMTV bed off one of my M1082 trailers and put it on one of my M931A2's. Can anybody photoshop what that would look like? Lol. Dave

I've got two M1082 trailers and I'm considering pulling the bed off one and putting it on one of my M931A2's after I pull the fifth wheel off. If I do it anytime soon I'll let you know and may not need the the chassis left over. Dave

The "loud siren" is probably the low air pressure alarm.