Search results

Question on the hydraulics: I use my switches and air pump for cab lift and the cab falters about 1/3-1/2 way up. I take over with the hand pump and it seems to falter after a bit too, sometimes will not elevate the cab all the way with hand pump. So tonight I removed the spare tire so I can...

I saw broke overland install this one: I ran across this video too discussing the circuit. Not sure you'd even need the relay after studying this a bit as it seems the brakes do the relay. But ..... Seems like there might be a cab controller that talks to the ECM that appears is in Broke...

All good points, definitely things to consider. I know that the lower the center of gravity the better. I wonder if something could be devised under the frame? I have a pretty good void above the rearend diff axle. Have to measure and see.

My plan was to build an interior skeleton/frame inside the cabin wall to wall and fit out for some more vertical storage of tools etc in padded pelican cases. Perhaps interior fridge to supplement the cabin fridge. This frame would connect to the floor and the frame the cab sits on. This...

When will you have some more on eBay?

Modify something like what you did to mount to the roof rack and lower. I'd like to make it removable and storable...

I was thinking about relocating the tire to the top and building a rack for overhead stuff. Think this would add about 800#ish.... I wonder would this strain anything?

Good idea. I just had that on my list to buy.

Is that Generator a little diesel one or? Is that originally made to fit there?

A military bud of mine invited me on base the 17th to talk with Motorpool guys and bring the M1078. Any potential questions I should prep to ask? Is it possible to plug up to read codes etc on my CTIS? Haven't gotten around to trouble shooting this much more. I pulled the Air dryer filter and...

God bless you sir.

These seem to be harder to find.

Well we know it don't stand for "friend". LOL

Yes, if it's not too late I saw you had closed the offering.

You are a wealth of knowledge General. Sometimes I post on my phone and notice they don't go through, apologies. Happened a couple times. I sent this serial early this AM: A-T 101564 BGFR I have the WTEC III trans shifter if I recall right.

Going to try to fab something like this in between the cab link and the support frame...

It is slanted. But seeing that right angle one I am thinking a mod for a generator might be coming up.

Bottle Opener. LOL

Here the back and shot from side configuration.

Probably smoother riding a buckboard wagon on washboards than riding this. It’s sitting only on biscuits. So I am thinking the best way to spend money on comfort upgrades will be the suspension…( if it even possible someone makes good suspension this large) and air ride seats. The single...