Search results

I have a hard time understanding the manuals. The machine ran, then sat for a year. when you turn the switch at the front panel to prime then start, nothing happens. If you use the dead crank switch it will turn over but not start. I have done some searches and there were 3 different main...

I believe my switch is broken. It won’t send the signal to spin the starter. Also while I was diagnosing it I noticed there are 3 terminals in the starter what is the 3rd one for?

I will if this does not hold

stock starter bolts won’t work because my holes are too big because the previous owner did not use the starter bracket

just wonder if anyone had luck drilling out their starter and running 7/16 bolts for their starter. i really wish people knew how to work on these trucks instead of throwing Chinese junk starters on them and not run the rear bracket. I tapped the block and ran engine mount bolts in its place...

I have some cucv troop seats and bows. Needs all new wood/ fiberglass. $150 everything 2.5 / 5ton geared l wrench. $75 m1008 frame $600

So are you saying make my own panels Instead of buying panels that do not fit the greatest?

I have searched and can’t find any pictures of floor pan replacement. I’m looking for pictures of the floors panels installed under the seats and right behind the seats. Anyone have any Picts or a good link to a thread?

So I’m pretty sure I don’t have enough resistance or a bad electronic flasher. I tried the hazard flasher again and made better contacts and can get them to flash. They just flash random because of the leds though.

All of a sudden my turn signal decided not to work anymore. They we’re working perfect Then just quit. Here is what I have done with my truck latley. full leds except for the front bulbs so there is resistance/ all bulbs blink like they should with hazards on. led hd flasher and switched with...

What happened to the part numbers that were listed in this thread. They were pushlock and had part numbers to discounthydralichose

Looking for a 5/8 snatch block and complete m939a1 winch.

how much did that end up costing you?

I have a pump leaking from the same place. How did you Make out fixing the leak? Do you still have the Cummins numbers?

when I recovered this truck were we’re racing the sun home.

You got it. Pm me your number. I will be there on Saturday.

I have: 1 deuce passenger side mirror assembly. (West coast style) $40 obo 1 rebuilt c turbo- make serious offer I can’t refuse (1)2.5/ 5 ton drop side $50 bows, extensions and corners for a deuce. Not sure what they are worth m116a3 thinking $450 on this geared lug wrench $75

Got a new to me 929. All exterior lights work except for the headlights. No high beam or low beam. No voltage at any of the prongs. Weird thing is when I set my meter to resistance it’s ringing out between ground and I believe pin #17 at the headlight. Anyone have this problem? Maybe bad...

Doing some research it looks like I have a M929 and is a 1985

Yeah that would be great I need to put something down for my title.