Search results

I have never bobbed a deuce but I would assume there has to be some welding of some sort done for the rear suspension? Check the welds for quality, penetration and cracks. Cracks should show up as sharp rust lines.

Double post, OOP'S

Like I said, engine donor.

Quick answer, 400 hz generators are good for engine donors, that is about it. You cannot run anything except resistive loads off of them. Rick

I live right on the ranges there. one block in.

Well you got yourself a deal. If it maintains with the ball valve open then it is higher than 15CFM. I would like to have one but at this point I have to start thinking about selling stuff. It will not be long before I cannot walk so that kind of stuff would not help me much. I see they have a...

Red, thanks for bumping this up since I had never seen it. Very nice work Driver. Uglyranger and I had talked many times on other forums about 151's and also the guntrucks. Rick

I am not sure how many numbers you can be off on that button. Diesels are very timing critical. All the white smoke tells me that at least one cylinder is not firing. Did you check the button by the math method or the port timing method? The math method is best since you have both the new and...

Welcome from Pemberton, Where abouts are you? There is a a guy in Toms River that sell parts here and he recently had a few trucks for sale. There are currently several up for sale at Ft. Dix on G/L. Rick

That is at least a 60 gallon tank and it is also a rotary compressor so it is not in the same league as the compressors that we were discussing. I will admit that it probably will fill that tank in a minute but this is a compressor that is designed for volume and not pressure tools. This is for...

Before you go insulting me I would suggest you do some research. I do not think there is a 15 CFM compressor made that is hooked to a ten gallon tank. Would not be safe. I will look into your part number and if I am wrong I will apologize. One cubic foot is roughly 6.5 gallons. Rick

The parts for the Quincey are still available from Quincey. As far as the 15 CFM rating, no that is not going to happen. If you are building 150 lbs of pressure in an 80 gallon tank in one minute then you have 60 gallons of water in it! These are good compressors though so if you get one...

That was what I meant by the "After Sandy" comment. Before the storm they were in the 1500 to 2500 range. BUT, You are on the other side of the country so I cannot speak for prices there. I know generally things are higher out west. Rick

I know I have not been following prices all that much but WOW! That looks like what I was seeing here in NJ after Sandy. Have the prices really gone up that much? I have seen super low hour sets selling for much less. By the way, this should be in the classifieds. Rick

http://www.steelsoldiers.com/showthread.php?101496-M151a2-Resto-project This is probably it. Rick

If you are making 151 panels I know a lot of people that would be interested in a quality product. Myself included! Send me a pm and we can discuss. Rick

What are you going to do for new panels?

Somehow "Safety first" and "Made in China" are pretty contradictory. I would want something a little more substantial holding my butt in. ESPECIALLY the belts! If you plan on doing stuff that requires a 4 point system then you better build a big honkin' cage!!!

Heavily spot welded since they are a unibody construction.

You are kidding me right? a 24 volt starter needs 24 volts, period! Anything less than 22.5 while cranking and cranking stops. If the rear battery is low then where do you plan to get the extra voltage from. I have to agree with Doghead, there are people posting on here just to see themselves in...