Search results

I have an m1026--original with the fold up side mirrors--Airforce---no power steering cooler--my friend from the guard said it is the first one he has seen like that---got the cooler from hummer parts guy--$45--also got the gearbox from the same guy for $225 with no core--

what temp are you waiting for-----I have to pick up next week--hope to get 30* weather in nj--this week 17*--nice trucks--they look cold

I agree-its a bad idea--I will tell him to FUGGEDABOUTIT--he is from nj

A friend of mine wants to run a M923a2 with a big plow blade and large salt spreader--He says fully loaded the truck would weight 50000 lbs--Would the axles and tires handle this weight--what is the max load for the front axle----I know the gov only rates this truck at a gvw of 31550lbs--

John---what humvee did you get--any pictures of the new truck

Get a nut that fits the glow plug threads--cut the nut in half--place the 2 pieces around the thread of the stuck glow plug--put a wrench on the 2 pieces to hold it together--screw the glow plug out--this will force the nut against the head and the plug pulls out====spray the plug down with...

Hi Pat--Anything new with M35A2C--has it been behaving-- The cold weather is great for a ride --The engine likes the cold air--more oxygen--Did you get the tank cleaned out?

Sounds great Pat--glad you found all the ip pins--they beat me up for months--Gimpy Rob also helped me out--He is the guy that told me my ip pump was 180 deg out on another truck and was correct----That truck only took 2.5 years to get going-------Good job

Great job Brad---now it can make some $ with it--

My m925a2 did the same thing--volt meter in the red--my volt meter reads 35volts---cleaned battery terminals--load tested each battery and all ok--ckecked all connections to the alt and grounds---charging still reads 35 volts----will try changing alt--will let you know what happens

Hi datadawg--what was the winning bid---how did you figure the $2000 scrap value------all of this is big bidding action-----how could the bidders make any money after all the expenses---

need trucking for m35a2 from jackson nj 08527 to syracuse ny area---approx 340miles-thanks george--732-581-9058

Hi Eric--need a quote for shipping M35a2 from jackson nj 08527 to syracuse ny area--thanks george--about 340 miles-----732-581-9058

ichudov~i will check the hi lo~~it does sound like what you described~thanks

good idea~sounds like a shaft turning fast ~tin noise could be a shield~thanks

Just purchased a m923 --the front axle has a very loud noise in forwards and back--axle has oil in it and no leaks--in the video you can hear the noise--any ideas--thanks------------------------------ http://youtu.be/BxrF00N_wtk

Hi Dave--check out this thread--http://www.steelsoldiers.com/showthread.php?79327-M923A1-losing-prime

Hi--welcome to SS--There are many members with M923 trucks---good luck with the trucks--I do not know where the line may have an air leak but the members can help you--George

The pictures are from scrap sale info that everybody received-------not to top secret

Thanks Mike----the 12 volt wire powers the low speed side of the heater blower motor----the ground wire and 24 volt wire I do not know--the p2p starter battery section is not very clear to me--let me know what you find--the 923s are getting expensive!!!