Search results

Petrol would be gasoline, but why put gasoline in the mixture, fumes could cause a runaway sitiation?? Usually engine oil alone is used in oil bath filters...

The worn nut theory doesn't make sense to me at first glance, but I have too much respect for Gerhard to argue. :-)

This should be your truck towing the launcher, the M572...

RE: Re: RE: Axle vents and off roading The deep water fording kit includes a low pressure regulator, I simply tee off from it.

I found this today and will try it tomorrow.

Nothing fancy Gimpy, the original paint is still good, so I scrape, sand, wash and wirebrush the previous owner's poor paint job off and prime it with good old Rustoleum "rusty metal" primer. I take pictures as markings and numbers apperar (see image below). Oily parts get soap and water and...

Tacked the brackets in place. The pieces can now be brought to a shop for expert welding.

RE: Re: RE: Axle vents and off roading Possibly, but it was mentioned in the "fording" articles, perhaps a more detailed description is in order......

No, the 4070 does not contain inhibitors, it's a plain filter cartridge. See Clinto, by now you could have read my article. :-)

The NAPA # is FIL4019 for the bracket. Mine actually came from ebay.

Re: RE: Axle vents and off roading Right, I'm actually able to pressurize all axle housings, transfer as well as the bellhousing/transmission (standard fording kit option). Pressure is about 2 to 3 psi. Remember to keep a tight seal around the shift lever for proper pressurization of the...

Tm 43-0001-31 has all the drawings. The detailed M52 one is courtesy David Doyle and is in pdf format.

Metal cutting the hard way. :-)

Jon, this is for a "D" turbo, which may be slightly higher than the "C", FWIW: At idle: 0-1 psi At 50 mph: 5-6 psi Hill max reading (my experience): 12 psi

Individual, Patrick. The Continental AVSI-6 is an equivalent 12-cylinder air cooled engine used in the M60 tank I believe. About 700 hp. The cylinders are separated for cooling.

Here you go.

Order on line: http://clarktruck.com/ They have always been good to me over the years, so I thought it be worthwhile to mention. They are near Charleston, WV.

Ken, these drawings should give you most of the dimensions. The 5th wheel on the 757 will be 4-3/16 inches forward of the center of the bogie. It's not shown in this particular drawing, but it's the same as the M52. The axles in each bogie are 58 inches apart and spacing from the rear front...

RE: Dueling 1600s... some things just ain Hmmm...I suppose having duals will solve your spare tire problem...you wont need one. :-)

David, the M52 was cut up further by the new owner, who bought it for parts. He is in Oklahoma. The 5th wheel has wedges to keep it from rocking from side to side when on hard level surface. Of road, the wedges are pulled out to allow sideways movement. Ken, the height of the 5th wheel on the...