Search results

Well, lots of iron and lead, but no tin. It's odd not to see any tin in the analisys unless the bearings aren't of the lead tin overlay type. Technically, you should have a baseline to compare the results to..so you know what is in the new oil to start with and see what is abnormal. I take it...

Memphis has all the rubbers for around the doors, the felt channels for the windows and the rubber for the windshield.

Got mine at bLowes with a gift card I got last X-mas from my boss. Austin Avaitoin has these, http://cgi.ebay.com/Jack-Plate-Military-Off-Road-Part-Jeep-4x4-HD_W0QQitemZ190046038436QQihZ009QQcategoryZ588QQtcZphotoQQcmdZViewItem

I was gonna get this one. http://www.hobbytron.com/ElectricSpecialOpsM4RISAirsoftGunDYT7799.html

Sounds like a low fuel pressure problem..filters...low PSI pump. Are yop using straight diesel? Mine will act like that if I have too much gas in the tank.

Keep going. If they are stuck, sometimes you can just pull the plunger out, scotch brite/WD40 them, put them back in and give it a good tune up, and it is good to go. Make sure the push tubes aren't bent b-4 you tune it up. OH yeah, do them 1 at a time so the plungers don't get mixed up. It...

Arcadia Ca., lokoks like Bejing if you look at the storefronts. A little rice rocket decided the deuce was too slow, passes on the left then immediatly cuts back in front of me...AND STOPS! Lucky for him the deuce handles like a Porsche! My back, arms and neck were sore for a month, didn't hit...

Im' shivering just looking at it!

What are the cages for?. Low miles too! http://cgi.govliquidation.com/auction/view?auctionId=1061197

RE: Re: RE: ANY know what this is? This comming Sun. is the monthly MVCC meeting. I'll look.

903 and V8 300 are different. There SHOULD be a data tag in the valley of the engine...under the fuel pump and air compressor. DO NOT use scotch brite, sand paper, steel wool, ANYTHING to remove paint or gunk on the data plate. You will make it so it can't be read. Try brake cleaner 1st and just...

RE: Re: RE: ANY know what this is? Well, out here, Lou's Light House. Where you are, A place that deals in class 8 truck lighting. NAPA should be able to get them.

Welcome to Steel Soldiers! Ditto on the 715 pullind the M35s. Remember be safe, if not for you, at least the person next to you.

RE: Re: RE: ANY know what this is? That's exactly what it is. Alot of the older county and trash trucks I see have the same switch.

Bjorn, don't know what torque it takes to turn a new ball joint, but they are tuff to move. Maybe what you have is normal?

Lynchburg! Does Jack Daniels live there?

Re read that, hope that didn't sound snotty. I've just been taught to do the easy things 1st.

Like I said, Do easy things first. When Injectors stick, they make a VERY loud noise, it can be described as a knock, a bang, a ticker. The engine will miss, rock, snort and I heve heard them back fire! The plungers stick in the position they stopped in, all the way up, down, or anywhere in...

Looks and sounds great! Hope you have enough good weather to finish it up.

OK, i'm stumped! :? I have no experience with them, been in Southern Ca, so we never had to work with them. Tried the oldest manual I have, 1981, nothing in it and also tried on line at Cummins. No info, Sorry :(