Search results

If it's an old hose it will be stiff as hell. The heat gun trick will work.

Take a look on Ebay, that's where I got mine for the doors and windows. Look at the pics and match up to what you need.

Quite possibly one of the cleanest, most original Deuce you'll find! 10 new tires, new brakes, all new canvas, recent paint, recent interior, complete Pioneer toolset, correct troop seats, no issues, runs and drives like it should. Upgraded oil filters to spin on style, has winter canvas on...

AND she's finally done! Painted, stenciled, and bedliner sprayed

Ok, latest updates on the build: panel installed and wired, battery box in, batteries installed and wired. She runs!! Just finished painting the bed today and probably spray the bedliner this week. All tires are finally mounted ( beast of a job with those big 325/85R16's).

Other seats can be made to work........start looking around at car/truck shows and junkyards. Easy? Probably not........the way the frame mounts ( on 2 different planes) will require fabrication and welding of some sort.

You think you need it on a 55 mph vehicle?

Ok, another update. Got the alternator back from the rebuilder and it's installed along with new belts and my Flex fan. And I located a set of correct ignition wires. Yup they were pricey but available stock seems to have dried up and it's not getting better for these old trucks that were never...

Ok, more progress today but it's on something different..........the steering wheel. Mine is in terrible shape but I can't find one. So I ground out the cracks in a "V" shape, filled them with JB Weld, and I'll sand them to shape ( most likely will need 2 coats). When done I'll repaint the wheel.

I got a deal on 7.00x16's from Coker Tire......10% off and free shipping! I've also finally got the correct M38A1 fuel pump for my Jeep. AND I have a shop local that will rebuild the starter. All this will be done early spring ( too cold in the barn right now).

Ok, another update. Got the starter back from the rebuilder and will install it soon. Also overhauled the carburetor, and installed the spider harness on the back of the gauge panel. I'm getting the alternator back this week from the rebuilder and should have my new seat cushions from Beachwood...

Hahahahaha! Yeah they suck to install

Thank you! Floor switch will be installed as soon as I get my cables ( 1 guage custom made)

Ok, some more updates on the build.............going to install 18" Flex fan to help cooling as I haven't found a fan shroud. Painted my bridge plate, also blasted and painted my brush guard and battery box. Finished the install of the Selectro hubs, was missing a few small screws that I...

Ooooops, you're correct! Morning eyes and no coffee......hahahaha!

Circuit 27 shows a diode, that arrow is NOT the direction of power

Further progress made today.........I redid the distributor. Prior someone had converted it to 12v but butchered it. I cleaned lubed and serviced it ( bushings are snug), replaced capacitor and lead wire, new coil, cap and rotor, added a Pertronix Ignitor, and all new brass screws ( thank you...

Ok, as of November I've been able to get the Beast in my shop to start the Resto. I'm keeping it close to original with a few upgrades, kinda like a Depot ovh.

Jealous! Keep us updated please

You're correct! Somehow I missed that it's a "C" model, that is one RARE Jeep right there!