Search results

Ok inside pics of the door.. The supports make this tricky to cut but it shows most of it. You can see by the first photo there is only about 1 inch between the door skin and glass rails and I need 2+... Installing the solenoid and window motor should be the equivalent of stretching a...

Wooooo Hooooo.... thank you thank you thank you... If anyone has seal, bearing, or filter measurments for any MV please send them to me so that I can cross them to valid part numbers.

LOL... gun pintle!!! Navy mount for 50/30 cal's

KH... Im using 45 lb solenoids and a 7 channel remote I bought off of eBay which is what prompted me to buy the PW parts from the same seller. I had thought of hunting down 24V starter solenoids and just using buttons but I already bought everything for a 12V system for my AC and radios...

With any high speed cup and cone set it should flow as your thinking... Just dont get nutty with it or it will ruin the seal seating by pushing them out of place. (heat, force, etc)

I renamed this thread due to bouncing from doors to sheet metal to this to that and so on... Sorry for any confusion... I am in the process of shaving door handles and installing power windows for the Deuce... (yes I know im'a nut) I purchased a second door for doing mock up work so I don't...

I can only afford one addiction at a time so I rotate them bi anually... Ask towards the end of the year! :)

PLEASE SEE THE CORRECTION TO SEAL SIZES ON http://www.steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=5023 Cool... I've been searching for those sizes!!! The above seal mentioned by davemccoull is listed by CR in 2 different seal types... 23442 is a single lipped 60X80X10 (ID X...

Monroe cross number for the Gabriel 83400 part number is 66903

Damn it I was looking everywhere for that post yesterday... Was prolly looking under hotrod and mods though... its hell bein retarted! :) Ken thanks for the parts yesterday! Lost a seal in the back end of the rear diff, the poor pig was covered in gear oil when we got back... Not a project I am...

Anyone found a civilian PN for Deuce shocks?

I just rebuilt one of these a week ago, after seeing the inside of it I would highly recommend yanking yours and going though it. If you don't know where its been and what its been though its worth the 38$ to get the kit. The job its self is easy to do (mind where the springs fly off to), you...

There is a BAD case of OD green fever goin on here!!!! rofl

Ken what do you have to do to that wrecker of yours? Better question... What are you doing tomorrow? I need to come get those u bolts and plates from ya.

Upper: Gates # 24032 Lower: Gates # 20611 You will ahve to do a little trimming but these should take care of it.... Now... if we had a parts cross ref page around here!!! *hint hint hint* :)

I would have resold them 6 months ago and not felt the least bit bad about it... 9 months, I think he's found another hobby!

Florida FINALLY got smart on CC and self defense... Laws changed back in Oct 05 to protect the person whom is defending him or her self. The castle law as its known has been in effect for as long as I can remember which basically says you may shoot the snot out of anyone in your home no...

Them be gel cells.... and mighty expensive ones at that!!!

If you mean that black and chrome jobber parked on the side of the road FORGET IT!!! ... Im not going THAT far LOL...

I was bored today... :)