Search results

Can you post some PIC's?

NO just a big cab. Do you have the spring hangers off yet? Your parts should be on the way tomorrow.

Well I scored a hard top that is fixable. Rough but would work. I went to put it on and it is about 6” too wide on each side of the cab. The tag inside showed 2 ½ and 5 ton however it does not fit the deuce. Put it on anyway to see. When I drove down the road it was much cooler. The sides...

RE: Hard top Yep same type of tag that is in my top. Contract # and Ordinance # are different.

numbers on top MFR5U403 DAAE0796DA006 12256227

No idea, I thought they were the same.

Ok I have a 1967 deuce. The cab measures 70 at the back 63 at the windshield. I found a hard top that has a tag inside that says 2 1/2 ton 5 ton enclosure. The hard top measures 82 back and 75 windshield. What is going on here?

Search E-Bay for "beltfed34" he should have some.

I think I use a newer chev booster off of a pickup and the corvette master. I would have used the pickup master too but it was for disk / drum and I need one for drum / drum. Too lazy to get and adjustable block and work out the presures. If you are going Disk / Drum most any will work. I...

www.m715zone.com Lots of answers. Power steering, I used one from a 80's camero, works great, direct bolt up. Any of the GM, Jeep, ect that bolt to the inside of the frame, they are the same. Master cylender was from a 74 or 76 vet, can't find the post right now. I kept stock breaks so...

With the 12" rim mod, will 16.00's clear everything on the inside?

OK on the modified 12" rim, will 16.00 20's work and clear the front. 3-4" lift with 3" body lift.

The mineral oil I am talking about is from large electrical transformers. When they work on the transformers they always replace the oil with fresh. I can’t find much info on anyone using this type of oil as a fuel.

Still can't find much info on mineral oil used as fuel. Did find info the the Govt. stoped the PCB oils around 1960 in transformers. Seams to me like if it would work, someone here would have tried it.

PCB's. I thought that the current oil was not as bad as the old stuff that was used. I know EPA changed several rules about what could be used. Is meneral oil a form of desiel?

Has anyone used mineral oil as a fuel in the deuce. I have a line on used mineral oil. The oil was used in transformers and is changed out. Think it would work?

I was in the process of installing one. Pulled back off until I finish body work and paint.

I used the Wal-Mart camouflage OD green over the 383 on my 725. There is a big difference. Looks dirty every where I sprayed over the 383. RAPCO e-mailed me and said that they carry the 383. “ Yes we have current 383 green our part number is 34094. You can place you order at...

I don't know about VA but could your local DMV do a title search and if none is found do a bill of sale and bonded title.

Do you have a source for weather strip for te front doors?