Search results

Agree the 400s are HUUUGE and heavy and rub against things.

That rpm is similar to what a 3 speed HMMWV sees at that speed. Maybe not going into overdrive (4th).

See if you can find this plate behind the driver's seat on the sponson. The serial will be there. Hopefully it will match MD51570. I think the MD27262 is suspect due to the data plate cluster board being green not blue. The serial is also on the engine by the water outlet neck, but it is...

Did you see the responsible agency plate says "US NAVY"?? I would first see it the serial number on the main data plate matches the Jeep, if it does you have a NAVY jeep that someone painted blue. Or a NAVY Jeep that happened to be blue for some reason. If the serial numbers don't match...

A 1000 watt 24-120 volt inverter, when loaded with 1000 watts of 120 volt devices such as lights, fans etc will draw 40-50 amps of 24 volts DC. The truck's batteries can handle that for about 5 minutes, then the voltage will droop and you will have to start the truck to let the alternator...

If it's ALL the lights, sounds like the auto-reset circuit breaker inside the 3 lever switch is either doing it's job due to a short somewhere, or it's on it's way to death.

Army tank guy on ebay: Gallon Paint Current Issue CARC Tan Substitute HMMWV Hummer 2 1/2 Ton 5 Ton | eBay

Why do people post videos that make themselves look like morons.

US Navy R-366/TRR-5

Start with Vintage Power Wagons. There are no military salvage yards with that model anywhere in the world.

How cool is that? Too bad they don’t still have the previous GMVs (HMMWV based) equipped with the same Rod Hall race suspension used in the Baja 1000.

https://www.govplanet.com/for-sale/Humvees-2008-AM-General-M1152A1-HMMWV-2-Door-Hard-Top-W%2FTruck-Body-Georgia/6004442?h=5000%2Cc%7C3468%2Csm%7C0%2Cms%7CG%2Cpstart%7C60%2Csort%7Cd+asc%2Cmf%7C1&rr=0.01613&hitprm=&pnLink=yes Why do you consider this a parts truck? This is an easy fix, only...

No luck finding this vendor online, can you assist?

I would glue it back in place with JBWeld.

The pre 1970’s military wheels were riveted not welded centers, could this be what you see?

Your plan is very confusing. My plan would be to buy a decent drop deck trailer with 40’ deck, and then sell it afterwards if I had no use for it. You want to be as non-sketchy as possible with this since you have to permit the load etc.

Time to hook ecm to CAT ET.

I would go with locally available industrial or automotive paint. Find the FS number and have them mix a quart for evaluation.

That is a Southeastern Equipment “Wood Tiger”. Nothing to start with. Call Red River Parts and Equipment, they have numerous unmolested M5A4 high speed tractors for sale.

Ha I was right about fastener ingestion.