Search results

Jimc, thanks for the endorsement. I agree with you and Munchies on the injectors likely being the problem. Sounds as though one injector is popping at a very low pressure. BTW, your new nozzles are due in today. Jerry:beer:

Mine all turn without difficulty using adjustable or pliers. Just offering cheaper things to misplace....DUH

A pair of pliers will do the same thing. Duh.:beer:

I have the starter cut out switch if you care to e-mail me at "jerry@queenscreek.com" Jerry :beer:

Rick, I'm sorry to hear that you have problems with Gulf Coast. I only bought from him once about 2 years ago but have sent several folks to him. That won't happen again. Jerry :evil:

If it is the stainless flex pipe you are looking for, be prepared to dig deep. 3 came with my laundry unit and I'm using all 3 between my 003a and the 002a. I had bought flex exhaust hose from Advance and used it and did aluminum tape to the exhaust fittings. Pricey and common steel which...

There is a local machine shop I may contact to have one made. Would be nice to have one on hand. I pulled the head to check the head gasket, cylinder, and valves. Looks good-cylinder still has machining cross hatching. There are 163 hours showing on meter. Head gasket was ok. Valves had...

Many thanks to all my fellow veterans. I salute you. Respectfully, Jerry:beer:

Jim, Injectors arrived today, spotless as the rest of your project. Glass beading is awesome! Working through the weekend and expect to get to them Tuesday. Jerry:beer:

There is a brass knurled nut with a flared flange the same size as the discs, which presses the filter discs to the top of the threaded shaft in the upper housing. Filter can is then mounted with a nut and small gasket and tightened against the upper housing's rubber gasket to make it leak...

What is a "broken Guide"? Jerry

Well done. I might even attempt it someday. Thanks. Jerry

Thank you David. Glad it all worked out well.\ Jerry

Majorgas, PM sent. Jerry

PM sent. Jerry

Other than the usual sources (Gulf coast surplus, AMBAC and Delks) I don't have any suggestions. Jerry

David, I wondered when you said #12. I thought #1 was with it and went back to you. But, now that you have flow timed, you know where to go next. Sorry, I have no 14 or P buttons. Jerry

Way to go. You must have installed the IP you got from Chris.

Thanks Ed.