Search results

  1. Artisan

    18,000 WINCH MOUNT

    That's not a bad idea.... Maybe have one piece waterjet cut from .375 or .5 steel like this and just get longer Grade 8 bolts and add undeneath...
  2. Artisan

    18,000 WINCH MOUNT

    The 10" channel is about .262 thick. There are 8- M12 bolts thru the bottom. I ordered some proper oversized washers for the 8 M12's. The rear strongback got upgraded to 2.5" x .25" square tube... All welds, top and bottom are to be uniwelded. Darn thing is heavy Ha~! Here is the bottom of...
  3. Artisan

    18,000 WINCH MOUNT

    The plan right now is to add a piece of 2" x 2" radius corner'd tailer hitch tube along the rear edge for more support. To be stitch welded top AND bottom. The front edge will be uniwelded to trailer's channel . Plus the .375" mounting plate / armorment.
  4. Artisan

    Artisan's M916

    Any fabricators here? SEE THIS LINK; https://www.steelsoldiers.com/threads/18-000-winch-mount.196251/
  5. Artisan

    18,000 WINCH MOUNT

    So the TILT trailer I am fixin' up for my M916 is getting a winch. I bought two of those 18,000 lb WARN Seris 18 winches a few years ago and now I have a use for one. I need to fab up a proper mount. I obtained a piece of 2" x 10" channel that is about 2.5" tall and is 37.625" long. I boxed...
  6. Artisan

    Artisan's M916

    Steering Wheel Repair So I called a couple of steering wheel repair shops and the prices were astronomical to putty up my ring cracks and fractures in the Bakelite 20" stock steering wheel and I have given up looking for a new one. I told a buddy about my plight and he recomended I get a...
  7. Artisan

    Artisan's M916

    So, I decided to bite the bullet and get all new tires for my trailer. I shopped them HARD! I ended up w/ 9-235/75/R17.5 tries for $565.65 "DELIVERED FREE" Total, Out the DOOR! 16ply, Load Range M 5675lbs each in a Dual Config So that is a 45,400 load rated tires on 2 axles that are rated at...
  8. Artisan

    Artisan's M916

    But because it is a dual set up the inners have to be the extended kind. I was hoping someone knew of good tough ones if they exist...
  9. Artisan

    VALVE STEMS QUESTION

    Thanx but with Duals you need the inner wheels to have extended stems so you can reach them to air up. ! I didn't know there were repair valves... SO I learned sumthin' !
  10. Artisan

    VALVE STEMS QUESTION

    So simple it might be, but there could also be some tricks or trick parts I do not know about... I am putting all new tires on my trailer. They are duals, 17.5 10 lug rims. What bullet proof valve stems would you buy? And what valve stem to put on my spare! Extended or stubby? ha!
  11. Artisan

    Artisan's M916

    VALVE STEMS QUESTION So simple it might be, but there could also be some tricks or trick parts I do not know about... I am putting all new tires on my trailer. They are duals, 17.5 10 lug rims. What bullet proof valve stems would you buy? And what valve stem to put on my spare! Extended or...
  12. Artisan

    Artisan's M916

    ...and the TM says 450 Ft Lbs of TORQUE! Less 10% is lubricated. NUTZ!
  13. Artisan

    Artisan's M916

    I had visions of baddddd things happening... Counting my blesssings! "Thimble" Sounds like the right name... ?
  14. Artisan

    Artisan's M916

    I BREAK TOOLS o_O So, b4 I put anything used into service that I bought and is used I give it a real good once over, looking for problemos. One ritual I have is dam the torpedos, all wheels are coming off so I KNOW, that the lugs and budds are not overtightened by some IDIOT and I am not...
  15. Artisan

    Artisan's M916

    Well, some fine tuning still needed and I have not taken Rebel for a road test yet but she rolled under her own power today for the first time and hooked up to the tilt trailer I need to spruce up for my lil Dozer! Yea, 383 Green it will be... It was a good day... :giggle:
  16. Artisan

    Artisan's M916

    Hood, Grill, Anti-Commie-Bar and Tow-Bar CHECK!
  17. Artisan

    Artisan's M916

    SO MAD! That guy DELETED on EBay sent me TRASH. That steering wheel is warped, scratched, cracked, divited and you can CLEARLY SEE the OE package was opened and someone transfered stickers to it. I FOUND the ORIGINAL PART NUMBER for that steering wheel in the packaging! WRONG STEERING WHEEL! So...
  18. Artisan

    Artisan's M916

    So the "Screen" , as in that framed expanded metal part that helps to protect the radiator under the grill, well, it was just laying there rattlin' away when I did the take-apart. Now that were rebuilding it is time to do something about it. I looked at the TM and it appears as though there are...
  19. Artisan

    Artisan's M916

    Wiper Ecentric Arm Clip I am pretty sure this is the ticket. McMaster https://www.mcmaster.com/98408a122
  20. Artisan

    Artisan's M916

    Well , I didn't know you had an M915 thread or I forgot, CRS syndrome. If you have a sec link us!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks