Search results

  1. gentrysgarage

    Looking for a used M800 Air Cleaner assembly, 11R20 5 ton Spare Tire Shoe, M939A2 Cummins mechanical tach drive assembly

    Looking for a used M800 Air Cleaner assembly, 11R20 5 ton Spare Tire Shoe, M939A2 Cummins mechanical tach drive assembly and a friendly Freightliner PartsMan...... The Tachometer drive can come from various Case tractors with either a 6BT or 4BT Cummins motors.....Oh and please be NEEEAAARRRRR...
  2. gentrysgarage

    Looking for Polyurethane T136-27 mounts anybody have a source?

    Once I finish the mounts on the Cummins it will be time to mico-align the drivetrain. The mounts I have on the T136-27 probably date to 1968 and are well past flat, rather than getting some NOS rubber I would like to upgrade tho polyurethane...anybody have a source? Thanks in Advance!
  3. gentrysgarage

    Is there a difference between the M35A1 and the M35A2 after mod transfercase mount height and angle?

    Is there a difference between the M35A1 and the M35A2 after mod transfercase mount height and angle? Seems the A2 after mod is higher and less angle? Anybody have any feedback? Thanks
  4. gentrysgarage

    I will pay $20 dollars to the first person who posts a picture of M35A3 jackshaft installed with ruler showing ujoint center to center!!!

    Like the title says I need the center to center INSTALLED distance of the ujoints of the M35A3 jackshaft . I am willing to pay 20.00 via PayPal to the first person who gets me a picture with a ruler! I need this measurement before I drill holes for the crossmember . I had gotten a guestimate...
  5. gentrysgarage

    School me in Deuce u joints, flanges, driveshafts and balancing

    School me in Deuce u joints, flanges and driveshafts OK People I am starting to research and stockpile the next phase of my M135 Extended Service Program and we are up to driveshafts. I am not having any luck with the companion flange for the M35A3 jackshaft to t-136-27 transfercase, NSN...
  6. gentrysgarage

    M35A3 Companion Flange 2520-01-408-3183 or Spicer Interchange number Please

    I am looking for the M35A3 companion flange for the Rockwell T-136-27 input; 2520-01-408-3183, or Spicer Interchange number. Thanks
  7. gentrysgarage

    What mechanical shift transfer case would you suggest, reasons, low ratio and what it weighs, Would you use? Thoughts on a T-233/

    I am considering upgrading my plan from using the New Process 205 into something a little larger, so I was looking for the experts suggestions and reasons for choosing, the weight and what low ratio is it. Only criteria I place on it is that it must be mechanical shift. Also wondered if anybody...
  8. gentrysgarage

    Quick question M35 front spring perch center to center measurements..Thanks

    Quick question M35 front spring perch center to center measurements..Thanks
  9. gentrysgarage

    Converting pto driven equipment to hydraulic and the decent into madness!!

    There are a few hydraulic threads on here involving some involving steering, winches and dump hoist. I read them all a few times,,,and sometimes the more you read the more confusing it gets…how much more so with the hydraulics where even the manufacturers are even trying to muddy the pond with...
  10. gentrysgarage

    5 ton Cummins 8.3 Mechanical tachometer assembly

    Looking for 5 ton Cummins 8.3 Mechanical tachometer assembly. Thanks
  11. gentrysgarage

    TM 9-801 CCKW Service Manual

    While searching for a Garwood winch parts manual I did find the CCKW Service Manual at the National Archives and I thought I would save you guys some time if you ever need the manual its here: https://archive.org/details/TM_9-801_Truck_GMC_CCKW/page/n543/mode/2up Reaching further it has already...
  12. gentrysgarage

    CCKW Garwood 2U512 winch parts diagram with bearings and seals numbers Needed

    I am about to tear into my 2U512 and I would like a parts diagram with part numbers if you got one. Also it would be cool if there was a writeup or video somewhere...if not once I get the parts and TIME lined up I will shoot a video. Thanks in Advance!
  13. gentrysgarage

    Ross HF-54 conversion question

    HiYa Guyz, Got a question for you. I am placing everything in the chassis for the 6BTA Cummins conversion in my M135 and can't quite fit the Ross HF 54 in front of the axle, due to rad/intercooler and the eventual air compressor (that is if I can A get the motor bracket for the Bendix 550...
  14. gentrysgarage

    Trapdoor Gin Pole Project underway, feedback/suggestions appreciated.

    First the mandantory disclaimer I am not an ME, nor have I done any calculations on what I am building. This is only a ongoing documentation of what I am building to suit my own needs. No warranty is stated or implied as to fitness and safety of what I am building. Use the info at your own risk...
  15. gentrysgarage

    Drilling, tapping lubricant brand and product info Suggestions request

    I have a TON of drilling, tapping and cutting coming up on the M135 and I need advice and recommendations. The drilling and tapping wax I have been using for 20 plus years is about gone and even if the label was legible I highly doubt it is available in today's "green" "can cause cancer"...
  16. gentrysgarage

    Saw this AFKWX on Facebook and wonder if someone could decipher bumper numbers

    Saw this neat AFKWX on Facebook and wonder if someone could decipher bumper numbers and what is the windshield sticker...seems to have a story to tell.
  17. gentrysgarage

    Wheeled Vehicle Frame Repair TM

    Starting to feel like Santy Claws here....
  18. gentrysgarage

    Ross HF-54 manual

    Here you go guys, maybe a new forum for general mechanical mods?
  19. gentrysgarage

    Looking for Cummins compressor stud, Freightliner and Ford medium duty online catalog

    OK Guys I am a little frustrated with the nickle and dime'ing of getting the Cummins in the XM135. First off ther Air Compressor: I am looking for the Air compressor mounting stud, the studs for the Dodge Cummins and M939A2 (crossed them) seem to be of the breakaway type, The one on the...
  20. gentrysgarage

    Delco Alternator Catalog with specs and dims

    I found this great Delco catalog with the specifications and dimensions...Good for the people who are looking to upgrade/modify their vehicles
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks