Search results

  1. Guyfang

    Mep-803a high idle

    Welllllllllllllllllllllllllllll, I hope your right. But the missing parts may be in the bottom of your oil pan.
  2. Guyfang

    Mep-803a high idle

    EDIT: Not stuck, rather, the IP's are not in the rack properly. Even when the IP's are not in the rack properly, the rack can "carry" the IP's along, with the engine start up. There could be several different reasons for this to happen. Its probably because someone did not have enough...
  3. Guyfang

    Mep-803a high idle

    Very possible. That's where I was heading, but wanted to get every other possible reason checked. It a bit easier to check the linkage then the fuel rack. But yes, very possible.
  4. Guyfang

    Mep-803a high idle

    Next, open up TM 9-6115-642-24, to PDF reader #165. There is a picture of the fuel shut off solenoid linkage. It gives you a measurement for how far the linkage gets screwed in. Print it out or just remember it. And check it. Then turn to PDF reader page # 170. There is the test procedure for...
  5. Guyfang

    Mep-803a high idle

    It still looks like to me, that the linkage doesn't slide freely . Look at this picture. Item #4 is a special nut. It doesn't hold the linkage tight against the arm. It slides back and forth. Will it freely slide back and forth in the long hole?
  6. Guyfang

    Mep-803a high idle

    Now lets see another 30 sec test. just like the last one. It was perfect.
  7. Guyfang

    Mep-803a high idle

    Also, noticed that the black know, is screwed down tight to the linkage. Its supposed to be loose on the linkage.
  8. Guyfang

    Mep-803a high idle

    Lets start here. Have you seen this document? Is your set adjusted this way?
  9. Guyfang

    Mep-803a high idle

    Please do this. Take a video of the gov linkage, while someone else starts and 30 sec later, turns it off. Tell that person, loud enough for us to hear it, when to turn off the S1. I want to see if your linkage is adjusted right. And please turn the screw back to where they were before you...
  10. Guyfang

    Mep-803a high idle

    Open you dialog field to see questions and answers. Have you downloaded the TM's, and read the operators TM?.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks