Search results

  1. clinto

    GA Leftover 2021 Ga. Military Vehicle Rally shirts for sale - various sizes

    Hey everybody, I have a few 21GMVR shirts leftover and an even smaller supply of prior years shirts available. I'll ship these in a USPS envelope and I can definitely get 3 shirts in one envelope, maybe 4 if they are small sizes. Current USPS price is $9.30 Here's what I have: 2021 S -...
  2. clinto

    Official 2021 Georgia Military Vehicle Rally swap meet thread

    Ok, folks, this is the thread for the 21GMVR. You post up what you'd like to sell, and what you're looking for and if you're open to trades. I'll get this started I have for sale: nothing I'm looking for: NOS Scepter fuel cans NOS drivers side multifuel M44A2 (M35A2) fender G177 tires...
  3. clinto

    Official 2021 Georgia Military Vehicle Rally information thread

    Hey everybody. This is Clint. Please accept my apologies for how long this has taken. Mac and I visited more than a dozen sites and due to the distances involved, every one of those was an all day affair. So both of us had to take an entire day off work, drive out there, look it over, and then...
  4. clinto

    Official 2020 Georgia Military Vehicle Rally buy-sell-trade thread

    Ok folks, the 20GMVR is almost here and this is the buy sell trade thread. Here's how this works: you post up what you're planning on bringing to sell and what you're looking for. And commerce will commence. Here's my lists: I am looking for: A pair of NOS highback M44A3 or HMMWV seats...
  5. clinto

    Official 2020 Georgia Military Vehicle Rally (20GMVR) information thread

    There are some big changes for 2020, so you need to read this. There will be a “too long, didn’t read” section summarizing the changes in Post #2 Welcome to the 2020 Georgia Military Vehicle Rally (20GMVR) Official Info thread. This is our 14th annual event. If you've never been, watch this...
  6. clinto

    Haldex Purest Air Dryer install on M35A2 - questions about wiring, etc

    So I have a Haldex N50011H, which I believe is original equipment for MRAP and perhaps M939 series trucks. I'll be installing this on my '87 M35A2C. After reading up on various threads (https://www.steelsoldiers.com/threads/air-dryer-for-an-m35a2.65682/), I have questions: A. I looked...
  7. clinto

    Dual voltage alternator compatability question (1505 vs. 1506)

    I have a buddy with a first generation M1078 (I can't bring myself to call it an A0). The alternator caught on fire. I'm fixing it. Truck came to me with a 100A 24-12V alternator 76761-N1506-1. And this is what I bought, not realizing the small differences. I bought a...
  8. clinto

    Civvy wiper upgrade (arms and blades) - need ideas

    Alright, I need some suggestions on wiper upgrades. I have the good aluminum air powered motors (which I like) and the standard civvy arm and blade upgrade everyone here has been running for years (Anco 41-01 arms and 31-13 blades). It works awesome except the chickenpoop plastic clips which...
  9. clinto

    1942 White M2A1 engine and gearbox colors.

    I'm doing a restoration on a '42 White M2A1 halftrack and I need some help with colors. The engine is at the machine shop and I'm building the gearboxes now. I think the engine is supposed to be grey (it was the same olive drab as the vehicle when I received it) but I'm not sure about the...
  10. clinto

    Official 2019 Steel Soldiers Georgia Rally (19SSGR) - Georgia Military Vehicle Rally

    This year will be very similar to last year’s event, obviously the date is 2019 specific. So, if you’ve attended the last few years, you probably know what you need to know. We'd also like to take this opportunity to thank our 2019 sponsor, Memphis Equipment, for their assistance. Without them...
  11. clinto

    Hutchinson 20-bolt aluminum 20x10 rims w/ CTIS module..... questions

    I'm mounting a set of 395s on a set of the Hutchinson 20"x10" 20-bolt rims that I think are Caiman and/or MRAP. I have a leak on two of them and both are right at what I assume is part of a CTIS system. I find it unlikely that the wheel o-ring is leaking in the same place on both rims, so it...
  12. clinto

    Correct WWII speedo gears?

    I have a '42 GPW and it has all the correct stuff: 4.88 gears, 6:00x16 tires, etc. Speedo is a modern repro and it reads about 10 mph low. I know some of the repro speedos have a rep as running slow, but I'd like to verify the gears I have are the right ones. The one inside the transfer...
  13. clinto

    M38 front steering linkage Moog numbers?

    I have a client with an M38 and I need to rebuild all the steering linkage. I hate using the cheap Chinese reproduction stuff and I've had good luck with Moog stuff with my musclecar clients, does anyone have the Moog #s for the steering linkage? Everything, so inner and outer tie rod ends...
  14. clinto

    2018 Georgia Military Vehicle Rally buy-sell-trade

    So, let's go ahead and do this. Last couple of years I've been slack about getting the threads out as soon as I'd like and 2018 is the year of change. So, this is simple: post up what you are looking for and what you're looking to move. And please, remember, we're 7 months out. If you're...
  15. clinto

    2018 Ga. Military Vehicle Rally volunteers thread

    So, I forgot to create this one when I created the rally thread and the rally buy-sell-trade thread. We've worked for a long time to get the rally streamlined and I think at this point, we're pretty efficient. This is what we need: Registration tent: People with people skills, diplomacy...
  16. clinto

    Official 2018 Ga. Military Vehicle Rally info thread. Oct. 17-21, 2018

    This year will be very similar to last year’s event, obviously the date is 2018 specific. So if you’ve been in the last few years, you probably know what you need to know. We'd also like to take this opportunity to thank our 2018 sponsor, Memphis Equipment, for their assistance. Without them...
  17. clinto

    Halftrack axle nut sockets..............

    So they WWII halftrack takes two different axle nuts, serviced by one 2-sized socket. The front one, you can't use a modern civvy one because the axle stub sticks out too far. The socket bottoms out before you get onto the nut. Is there a way around this? Do one of you have an original...
  18. clinto

    M2A1 half track parking brake release button- sources for buttons?

    I need a button for the parking brake handle. There's a threaded rod, looks to be a 1/4" course thread. The button screws on to the top of that and you push down on it with your thumb when you want to release the brake. All this one has is a nut. I called Gary Hebding, who is the king of...
  19. clinto

    M38 / M38A1 civilian cross reference? Wheel cylinders?

    Is there an M38 / M38A1 civyy cross reference sheet out there on the web like the excellent one we have for the deuce? I have a bunch of customers with Jeeps and I'd like to be able to buy stuff like wheel cylinders from Napa when possible. And although I'm looking for an overall sheet with...
  20. clinto

    4 cyl M-series waterproof distributor caps (M38, M38A1, M151, L-head, F-head, etc.)

    So everyone knows the repro 24V coils for the waterproof distributors suck. Very bad reputation. To the point that people are starting to look for good originals when theirs dies. Apparently the distributor caps are the same way. I have a customer's M38 right now and he has 2 new Newstar...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks