Search results

  1. Mullaney

    Sun Roof, Moon Roof, Leaky Problem will be Solved Soon

    . So, over the past few days the bolts holding the plate on top of the cab have been removed. Most of them were a dream to buzz out. Three were rusted all to h%&!. Drill, grind, drill some more and finally the plate is down on the ground to be wire brushed... I don't know how many YEARS it...
  2. Mullaney

    Looking for information - Fiberglass Gelcoat - Stewart & Stevenson Grill

    . I want to start by saying that paint and body isn't something I claim to be good at. Anything you suggest will be greatly appreciated! Not really sure why, but the grill on my M1089 is made out of fiberglass. The strange part (to me) is that it is "hairy" now. It had been stored inside...
  3. Mullaney

    Door Glass Weatherstripping for M936?

    I can only assume that the weatherstripping in my 35 year old truck with a rag top has finally fallen apart. I am looking for the weatherstrip that goes in the door tracks. My windows rattle (sloppy in/out) when the doors are closed and the windows are all the way up. It seems that the track...
  4. Mullaney

    Drip Rail Clamps for Convoy Light Wiring

    Are these available as individual pieces and not in kit form? Maybe as a part number I can order? Or maybe the proper name? Picture with 4 of them is shown below.
  5. Mullaney

    New to Me - Ferrett 1715.12.58 - Plugs and Points (No Spark)

    Hi guys, We have been through the "is it getting fuel" exercise. The banjo bolt on the carb loosened, the electric fuel pump shoves it out like a fountain. Didn't bother removing the air cleaner cap to look and see if it "squirts". Have removed the plugs about a week ago and pumped lots of...
  6. Mullaney

    Stuck Wedges? Right Side Brakes will NOT release

    M1088 sat for two weeks. Rained a few times. May have nothing to do with it... Both wheels on the right (passenger side) will not release. Forward, Backward, Tires will not roll. Right front DOES roll (works fine). Of the 6 wheels, 2 are stuck, 4 roll as they should... Bumped the drum a...
  7. Mullaney

    M871 SemiTrailer (A1 & A2), Tactical, Dual Purpose, BreakBulk & Container Transporter 22 1/2 Ton, TM-9-2330-386-14-and-P

    This is the two axle trailer with side boards and also with container locks. Twenty Two and One Half ton variety. TM-9-2330-386-14-and-P is attached Brief Trailer Spec is also attached
  8. Mullaney

    CAT 7155 Service Manual

    CAT 7155 Service Manual is scanned and also went through OCR so it can be searched. Scan by me (Mullaney) Book provided by 290smallcam
  9. Mullaney

    Official NC Denton Rally 2021 Buy/Sell

    Hi guys and gals! It seems like the Denton Rally is still on schedule... I would like to create a Buy & Sell thread here to get the trading and swapping, buying and selling started this year. Now that I have that part done, I need to go find something to buy or sell! Welcome to the fun! Tim
  10. Mullaney

    Balancing Tires - What About This?

    I remember before computer tire balancing for automobile vehicles was around. There was a piece of equipment that would roll up to the wheel, spin the tire, add weights, spin the tire again, etc. I remember being told that sort of balancing included the wheel and tire AND it also included...
  11. Mullaney

    My Mailbox?

    Got a note asking that another member should "clear your mailbox" so I can send you a message. Are there tools for that? A place to look for it? All I see is the "envelope" icon to see personal messages. I see 5 and a very few pages of PM's (messages). Am I missing something here? Tim...
  12. Mullaney

    MCT Industries Inc, JLTV TRAILER (2013)

    I recently picked up a JLTV Trailer. Air Brakes, Air Bag Suspension, Disk Brakes and a removable "Pocket Body" with a canvas top with aluminum bows. The trailer appears to be an ISO Transport Chassis - where there are 4 "Twist Locks" (except that the tires would be in the way). Is there any...
  13. Mullaney

    Chelsea PTO (Take-Off) for my M1088

    The thing that I was most concerned about was getting the winch and frame pulleys. Got those. Removed them from the frame and have started working to clean and straighten and grease the rollers. In a cardboard box, I found the Chelsea PTO that was removed from the transmission. Nice & Red...
  14. Mullaney

    Quest for Switches for my M1088 - PTO and Winch

    I have the electric PTO. I have the hydraulic winch and tank. Going to mount them on my M1088. I presume that the switches mount in the spot below the "gonna fall over sideways" guage. I also ASSuME that the winch switch will be spring loaded (to the center) and up or down will be in or out...
  15. Mullaney

    M1088 with 4 (Four) leads into the battery box

    I have had several postings about this. Today I am as close as I have been yet, but still not functional. Picture is attached that I used to make my battery connections. I have FOUR WIRES into the battery box. I metered all of them and two come back as ground. IE: I had one end of the...
  16. Mullaney

    Picture of your Battery Box?

    So, in broad daylight the batteries were just stolen out of my M1088 sitting in the parking lot with 3 cameras pointing in its general direction. I figure saying what I really think about people that do that would violate every rule there is here - so I will refrain. TO MAKE IT EASY: Does...
  17. Mullaney

    Fiberglass Top for my M939 Series Truck? Soliciting Opinions?

    I am considering a fiberglass top for one of my trucks. I know I can't walk on my convertible top on my truck now, but it seems like a hard top should be rigid. Any thoughts on that? Anybody have one on their machine and think it's great? Or the other way around - maybe it is a bad idea? I...
  18. Mullaney

    Bolt in a Tire on my M1088 / LMTV

    So, I am smart enough to not just yank the bolt out... On the other hand, it might be a short bolt that hasn't punctured the inner core of the tire - and the more I move the truck around - the worse it might get. This CTIS plumbing is new to me. Not so sure I want to call a tire repair shop...
  19. Mullaney

    Electrical Connectors for Tail, Marker and Lollipop lights?

    I don't really know what they are called. I thought maybe they were Packard Connectors (the male end) but what I have here in a bag "ain't it". What I am doing is adding a second light on the back of my truck - both sides. Hoping to make up a "Y" off the factory harness, add a few inches of...
  20. Mullaney

    M989A1 HEMAT - Part Numbers for the Rubber Plugs on the Electrical Pigtail?

    I poked around in the TM that I downloaded. Not much luck finding the part numbers I want (need). Pictures below show the rotten rubber on each end of the pigtail. Lights seem to work just fine - but the cracks mean water is getting in... Has anybody got a good source?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks