Search results

G'day everyone,.... Yeah, working on these trucks will do that to ya,.... ;) Aussie.

G'day everyone,.... Did you try lowering your tyre pressures as you should on sand? Aussie.

G'day everyone,... But if it was certified by engineers as can be done here would'nt that protect you as it dose us down here? Aussie.

G'day everyone,.... They are to restrain the bows under the bed where they are stored when not in use. In this picture you can see where the uprights are stored along the front of the bed while the bows are stored under the front of the bed. Brilliant is'nt it!?? Aussie.

G'day everyone,... Well while out in the workshop I decided to fit the new bow retaining straps. The original straps: And the new fitted: There is supposed to be another set on the other side but on my Deuce they are missing so I'll get the rod and fit it. So I guess now I...

G'day everyone,..... Well today the new set of bow straps ARRIVED! Its been a long journey. You see they were sent ok but got held up in Callifailure and then sent back to the sender,... Anyway after finding this out I had it sent to a friend in the US, (wait,... what!?? he has friends...

G'day everyone,..... Sounds like your air pressure regulator in the engine bay between the air filter and engine. Aussie.

G'day everyone,,,,, Amen brother,.... Aussie.

G'day everyone,..... Well its great to have you back! Aussie.

G'day everyone,...... Might have to keep my eye out for a couple of those,..... Aussie.

G'day everyone,..... Next is a couple sets of gaskets for when I get around to fitting the C turbo,.... Aussie.

G'day everyone,.... I believe so, they are new old stock for the multifuel. All in plastic bags. I hope I'll never need them but you know that old saying,.... "its better to have it and not need it than need it and NOT have it!" ;) Aussie.

G'day everyone,.... Just arrived today is the complete set of new push rods for my Deuce's engine. Its always good to have spares. Also an oil supply pipe for the C turbo I'll fit later on,.... Aussie.

G'day everyone,.... Saw this and cried,..... Aussie.

G'day everyone,.... If you've ever done an accredited 4x4 drivers course it will have included winch operation. You will then have an appreciation of how not to get stuck and if you do, how to extract yourself safely. You can then operate your Deuces winch safely and not damage anything else...

G'day everyone,..... Just ordered a new set of bow storage straps for my Deuce. The ones I had, or what was left of them were rotten. Took them off a while ago, the new ones will look awesome, that and having a full set. You know what they say about the little things that make a big...

G'day everyone,..... As it happens ALL except the lower radiator hose was replaced by the last owner, even the little ones on top of the manifold. I replaced the lower radiator hose after this: Even that took me ages to do, but i got it done. Right now I just have to put the radiator...

G'day everyone,.... I don't see anything modified but my issue was the gap between the lower pulley and the radiator shroud was half what was needed to get a belt past it. Thats why I had to move the radiator forward to make a gap to get the belts past. Aussie.

G'day eveyrone,.... No worries with the lower hose as its longer, the top hose was at its limit though. Aussie.

G'day everyone,.... Well I go the new belts on,.... I undid the bolts on the bottom of the radiator and the two on the brace at the top. I then tried to pry the radiator up, I had to use my porta power so I can raise it just enough for the lower bolts to clear so I can move the bottom...