Search results

  1. L

    803a would not shut off

    So we’ve been running the generator 7 days now. I shut it down on Wednesday. I’m at work and power came back on. My wife attempted to shut down generator and nothing would work. Neighbor came over and pulled this plunger out the solenoid. What’s my fix. I’ll be home in the morning to take a look...
  2. L

    Coolant leak

    Well Ida is coming and found this leak after running my first full load on the generator yesterday. It’s a small drip out this rubber cap. Please help Sent from my iPhone using Tapatalk
  3. L

    Aux Fuel Tank

    Would anyone have any objection on mounting this 40 gallon tank on top of the generator? Sent from my iPhone using Tapatalk
  4. L

    Whole House Install w/ ATS and Remote Start

    Day #1 Ran my all in one wire from generator location to my new wire way and installed ATS. Sent from my iPhone using Tapatalk
  5. L

    803a on Wheels

    Finally got to install my wheels/castors for my 803a. Purchased from Northern Tool Online. Heavy duty 5k lbs capacity that will not get flat spots. Had to use some angle to widen the base for the swiveling casters. Was easy to push even up a small grade alone. Ran my unit with the wheels locked...
  6. L

    Hooking up my 803a step 1-help

    So I have a 803a that I’m doing all my install work. I have worked as an electrician helper in a refinery and have a good understanding of what I need to do. I purchased Generac all in one wire 100’. I have conduit run from one building to another underground and then to my panel. I purchased a...
  7. L

    Battery issues?

    Generator will not start. Checked Voltage on both batteries and it’s saying 14v when they are connected together. Pulled the batteries off and getting around 13v on each battery. Put batteries on charger separately and topped off. Both showing 13v. Hooked back up together on generator and still...
  8. L

    Got my MEP-803 in today!

    Got the genset today. Came with the Jerry Can /55 gallon drum connection, slide hammer and strap wrench. Is it normal for these to come with these accessories? Sent from my iPhone using Tapatalk
  9. L

    House wiring questions

    I just purchased a 97 mep -803a. I will be hard wiring it to a ATS for my 200a main panel. The generator will need 100 feet of cable to the ATS. These are my questions. Do I need a breaker at the generator location upstream of the ATS? If so what amp rating? What size wire do I need to run for...
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks