Search results

WOW! That's one pretrip and posttrip I don't want to do!

Just replace the coils. It's not that hard.

It's mounted to the underside of the cab above the transmission, has two wires going to it and piping from both sides. I think I figured it out, I think it's the pressure switch for the wrecker governor. My governor doesn't work, I have to manually set the throttle for wrecker use. I assumed...

Hey SIMP, so what is that solenoid that I have under the cab above my tranny on my M936A2?

My M936A2 wrecker is overheating, I thought it would be the shutterstat, but the cross over pipe it mounts to and the radiator don't get hot at all while the engine is overheating. It looks like a night mare to change those two thermostats! Anybody change them out and any pointers before I...

If you look up on the floor of the cab above the tranny, I believe that is the fifth gear lockup solenoid. I'm betting yours is defective and mine is. Two wires go to it.

I have the same problem on my 936A2 wrecker. 5th gear lockup doesn't work, I'm limited to about 52 MPH. I understand there is a 5th gear lockup solenoid up above the transmission, maybe that's our problem. It has two wires going to it, and it's a reach.

I must of just cut into somebodies profit for used rims......

Yeah fits perfect on my m1009, my mechanic double checked, and I measured the same backspace as the rims that are on my 86. WVI-62-5806044 these are 4.25 inch backspace 15" rim, 8 inches wide.

https://www.summitracing.com/parts/WVI-62-5806044/applications I got sick of people trying to sell me used rims at $150 plus shipping as these 8 inch rims are hard to find. Summit has them brand new shipped to you at a little over $100. If you need NEW rims for your M1009 there you...

Thanks guys, now I need to do the grunt work looking for a leak. Thank you for the idle speed knowledge.

How do I set the idle higher on the NHC250? Starts right up, but releasing the throttle suddenly it will die, or driving forward or backward and stopping it will die.. I replaced the big canister filter recently but still have the issue. Any suggestions on a sight glass to install in the...

Thanks guys, I finally found the part number on them and found the part number for the 5 tons, confirmed not the same thank you!

Anybody know? I've been trying to go through the P TM's for both but my brain is malfunctioning.

I guess I am getting confused . Whatever is and was in the original military tires on an M35A3. Don't run flats act as a beadlock also? Sure seems like it when I Installed a new oring in one of them.

What if soldier B has a jacked up back too? :) Thanks, I'll have to study the process again on video. The pulling out part looks fairly easy. Chain tire to tree, chain to runflat, use vehicle to pull run flat out. It's the other part with trying to get it into a new tire that scares me. I once...

Thanks!

Yeah I use CTIS, so they're needed then?

Do we need bead locks in civilian use? I dread the day, I need to pull them out and reinstall in new tires.

Never mind, stumbled onto the part number on the TN site, found a brand new one on ebay. Crazy prices though. $50 for the mechanical pump. Part number is 11640665 if anyone ever has one break.