Search results

  1. Guyfang

    Third's Build Discussion

    Dream on!
  2. Guyfang

    Mep 003a fuel pump connectors

    Evvy, this is a very common failure, even when the pumps were new. Most are older then St. Peter now, and its fairly common that the EMI filter goes bad. The pump itself is cast iron. Few pumps fail. It happens, but mostly if they stop, its plugged up or EMI filters.
  3. Guyfang

    Mep 003a fuel pump connectors

    Open to see comment
  4. Guyfang

    Third's Build Discussion

    I have in fact, seen a room like that in an old German museum. Is this not a picture of Stormen Norman?
  5. Guyfang

    Mep 003a fuel pump connectors

    Now, lets talk MEP-002A and MEP-003A fuel pumps. There are two fuel supply 24 VDC electric pumps on your gen set. There is a third on the set, for using Aux fuel position when in the S1 (start switch) position, "Run, Aux". You need to be in the normal run positin to make your two pumps run. Why...
  6. Guyfang

    Mep 003a fuel pump connectors

    You posted this in another thread. Something you are not supposed to do, post the same problem in several threads. Below is my answer. I have a MEP-003a with pencil style emi filters on electrical feed to OEM fuel PUMPS 24volt. My problem is that fuel pumps stopped working and I would like...
  7. Guyfang

    Mep 003a fuel pump connectors

    I posted in another thread, where you asked this question. Did you read that post? I did not mean Evvy. I meant Brother.
  8. Guyfang

    Looking for mep-018a parts

    Mason, You need to look for parts in a "Parts Wanted forum. Its the rules, and you get better visibility when trying to locate parts. I will transfer this to the parts wanted forum for you.
  9. Guyfang

    Glow Plug Controller Card

    abwischmann82, This forum you posted in is for testing. You need to post in the CUCV forum. I will transfer it for you.
  10. Guyfang

    MEP 802A M8 Percent Load Gauge Issue

    Kurt has it right. This happens VERY often. I first ran in to this with a ROPU water purification unit. The gen set was a 30 KW. The CT wires were wrapped like a 60KW. Every time the big electric motor started, drawing about 26 KW startup, the gen set sounded like it would jump off the trailer...
  11. Guyfang

    MEP 805B wired to split 400amp panels

    This will NOT be found on the TM schematics. This was a directive that came out in, and I can not remember the exact date, but 2009-2010?
  12. Guyfang

    MEP 805B wired to split 400amp panels

    The thoughts from CECOM Guru's is that the gen set mounting bolts are often loose. There is often dirt, sand or fuel in between the gen set and trailer. Poor grounding . The Military kills about 1-2 people a year with grounding problems. So, there is now a bonding wire between the ground stud on...
  13. Guyfang

    MEP 805B wired to split 400amp panels

    Open to see comment.
  14. Guyfang

    M1028 stalled out & won't restart.

    And thank you for closing the loop. Too many folks never make that final post, tell us, and others who come along, just what did the trick.
  15. Guyfang

    My new hobby: Wood military vehicles

    Yeah, he was just being ugly to me.................................
  16. Guyfang

    My new hobby: Wood military vehicles

    Rest easy. Even my wife knew who it is. Thats saying something!
  17. Guyfang

    My new hobby: Wood military vehicles

    But I AM better lookin!!
  18. Guyfang

    Mep831a Fuel Cap wanted

    If you find one at NAPA, post the numbers here. help maybe someone on down the line.
  19. Guyfang

    My new hobby: Wood military vehicles

    Happy Customer!!!!!!!!!!!!!!!!!! Thanks again!!
  20. Guyfang

    802-a fuel gauge

    Thanks for closing the loop. To many people do not do that, and cheat all the ones who later read a thread, and can not learn something.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks