Search results

  1. jsthnt@gmail.com

    electric windshield wiper conversion

    Do you have any pictures of them installed?
  2. jsthnt@gmail.com

    M35a2 stalling when hot?

    Most of the time that I have issues with mine not running it is the filters are plugged. The return lines are leaking (letting air into the system) along with a week or none functioning in tank pump.
  3. jsthnt@gmail.com

    M35a2 stalling when hot?

    Are the feul filters clean?
  4. jsthnt@gmail.com

    1987 M35A2C Fuel Filters Change

    When mine did this the in tank pump would pump, but was to week to get fuel all the way through the system.
  5. jsthnt@gmail.com

    Possible Support Needed for Road Trip

    I am in Grand Island, Nebraska.
  6. jsthnt@gmail.com

    Power window conversion ?

    Robr had a thread on his bobbed m35 that showed how he did it. His build is one of the reasons I got a deuce.
  7. jsthnt@gmail.com

    Front axle seals and boots stepXstep

    Thanks I will see if I can order one
  8. jsthnt@gmail.com

    Front axle seals and boots stepXstep

    I do not know where to get the plates but after i did mine one of the bolts that hold the plate on fell out. Anyone know what the bolt is. I can not find a replacement locally.
  9. jsthnt@gmail.com

    Deuce automatic backup lights

    Thanks for the help. I was on that thread late last night but must not have made it to the end. Thanks again
  10. jsthnt@gmail.com

    Deuce automatic backup lights

    Has the thread that contains the plans for an automatic backup light switch been removed i could not find it in the search (not my friend ), but did find a thread that linked back to it. This link did not work. If it has been removed does anyone still have the plans and how to. If it still...
  11. jsthnt@gmail.com

    what all is needed when replacing engine rear main seal

    I have read several post on replacing the rear main seal in a M35A2, but none of them said before you start you should get these parts and have this ready. Can some of you that have done this before give a list of parts (part numbers) and tools that you should have on hand when starting? If...
  12. jsthnt@gmail.com

    Power Steering Possibility?

    Did u ask if they would do a bolt on replacement? After all they are already working on other military trucks. It might be a nice side project for someone there.
  13. jsthnt@gmail.com

    Still no power

    I pulled the lines at starting at the tank to see where I started to have problems. Finally when i got to the line that goes into the secondary filter I was able to catch the fuel well enough that I could let it run. And it started out strong and then just dwindeled to very little flow. I...
  14. jsthnt@gmail.com

    Still no power

    I changed them when I couldn't get fuel. I did not take pictures, but they were not good.
  15. jsthnt@gmail.com

    Still no power

    One of the first things that I did was pull the in tank pump, I seem to have a lot of problems with the in tank pump. I put it in a bucket of water and plugged it in. It pumped the water out. Maybe this is not the proper way to check it. I do have anouther pump that the bottom fell off of...
  16. jsthnt@gmail.com

    Still no power

    I changed the Filters and the in tank pump is pumping. I did not get anything to come out of the secondary filters bleeder. And I am not getting any fuel out of the line going to the injectors. It ran one day just fine and then when I came back it would not start. I am thinking that it could...
  17. jsthnt@gmail.com

    Still no power

    I did not see the screw when I looked. I am able to get the rpm's since I bypassed the fdc.
  18. jsthnt@gmail.com

    Still no power

    I turned the pump on today and with the bleeder on the secondary I was able to get fuel out of the bleeder, but I do not see that the line has all the air out of it. 2 things that I was thinking. 1. could my secondary filters be clogged enough that it does not let fuel by. It ran fine the last...
  19. jsthnt@gmail.com

    Still no power

    I have not followed the bleeding istructions in the TM's. I always thought that the in tank pump would bleed the system.
  20. jsthnt@gmail.com

    Still no power

    New problem, it started to not want to start right away. I changed the primary filter to see if that would help. When I did that the in tank pump did not seem to fill the primary filter. I took the fuel line off at the in tank pump, and fuel came right out. I took the filter back off and...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks