Search results

. TM's for the MEP 208A, Prime Utility, 50/60 Hertz, NSN 6115-00-450-5881

. Here are the TM's for the Rough Terrain 6000# Forklift gathered in one place. Lubrication Order LO 10-3930-660-12 Operator's Manual TM 10-3930-660-10 Unit Maintenance Manual TM 10-3930-660-20 Unit Maintenance Repair Parts & Special Tools TM 10-3930-660-24P Direct and General Support...

. SAFETY RECALL Problems with 8800 recently manufactured off-road Polaris vehicles. The steering wheel can separate (detach). Includes US and Canada For more information call Polaris at 800-765-2747 from 7 a.m. to 7 p.m. CT, Monday through Friday or online at www.polaris.com and click on...

. I have three small holes about the size of your little finger near the top of of the truck. It is called "a canvas" but it is more like a rubberized material. Has anyone repaired one? Is a bicycle patching kit an option?

. So, over the past few days the bolts holding the plate on top of the cab have been removed. Most of them were a dream to buzz out. Three were rusted all to h%&!. Drill, grind, drill some more and finally the plate is down on the ground to be wire brushed... I don't know how many YEARS it...

. I want to start by saying that paint and body isn't something I claim to be good at. Anything you suggest will be greatly appreciated! Not really sure why, but the grill on my M1089 is made out of fiberglass. The strange part (to me) is that it is "hairy" now. It had been stored inside...

I can only assume that the weatherstripping in my 35 year old truck with a rag top has finally fallen apart. I am looking for the weatherstrip that goes in the door tracks. My windows rattle (sloppy in/out) when the doors are closed and the windows are all the way up. It seems that the track...

Are these available as individual pieces and not in kit form? Maybe as a part number I can order? Or maybe the proper name? Picture with 4 of them is shown below.

Hi guys, We have been through the "is it getting fuel" exercise. The banjo bolt on the carb loosened, the electric fuel pump shoves it out like a fountain. Didn't bother removing the air cleaner cap to look and see if it "squirts". Have removed the plugs about a week ago and pumped lots of...

M1088 sat for two weeks. Rained a few times. May have nothing to do with it... Both wheels on the right (passenger side) will not release. Forward, Backward, Tires will not roll. Right front DOES roll (works fine). Of the 6 wheels, 2 are stuck, 4 roll as they should... Bumped the drum a...

This is the two axle trailer with side boards and also with container locks. Twenty Two and One Half ton variety. TM-9-2330-386-14-and-P is attached Brief Trailer Spec is also attached

CAT 7155 Service Manual is scanned and also went through OCR so it can be searched. Scan by me (Mullaney) Book provided by 290smallcam

Hi guys and gals! It seems like the Denton Rally is still on schedule... I would like to create a Buy & Sell thread here to get the trading and swapping, buying and selling started this year. Now that I have that part done, I need to go find something to buy or sell! Welcome to the fun! Tim

I remember before computer tire balancing for automobile vehicles was around. There was a piece of equipment that would roll up to the wheel, spin the tire, add weights, spin the tire again, etc. I remember being told that sort of balancing included the wheel and tire AND it also included...

Got a note asking that another member should "clear your mailbox" so I can send you a message. Are there tools for that? A place to look for it? All I see is the "envelope" icon to see personal messages. I see 5 and a very few pages of PM's (messages). Am I missing something here? Tim...

I recently picked up a JLTV Trailer. Air Brakes, Air Bag Suspension, Disk Brakes and a removable "Pocket Body" with a canvas top with aluminum bows. The trailer appears to be an ISO Transport Chassis - where there are 4 "Twist Locks" (except that the tires would be in the way). Is there any...

The thing that I was most concerned about was getting the winch and frame pulleys. Got those. Removed them from the frame and have started working to clean and straighten and grease the rollers. In a cardboard box, I found the Chelsea PTO that was removed from the transmission. Nice & Red...

I have the electric PTO. I have the hydraulic winch and tank. Going to mount them on my M1088. I presume that the switches mount in the spot below the "gonna fall over sideways" guage. I also ASSuME that the winch switch will be spring loaded (to the center) and up or down will be in or out...

I have had several postings about this. Today I am as close as I have been yet, but still not functional. Picture is attached that I used to make my battery connections. I have FOUR WIRES into the battery box. I metered all of them and two come back as ground. IE: I had one end of the...

So, in broad daylight the batteries were just stolen out of my M1088 sitting in the parking lot with 3 cameras pointing in its general direction. I figure saying what I really think about people that do that would violate every rule there is here - so I will refrain. TO MAKE IT EASY: Does...