Search results

There are different design pressure plates I have found. The one I pulled out of the truck has no adjustment that I can find. There are three screws for the clutch fingers. I am trying to set ip my new clutch per the manual. The I have dialed in the first adjustment. I am having issues...

I picked up a clutch kit from a local milsurp place. The kit came with a standard clutch disc and a greaseable throwout collar. The pressure plate nuts are a little different also. I hope this kit is right kit 👀

Thank you for the information. My throwout bearing was what failed and toasted my pressure plate.

Wow! I am about to pick up the parts for a clutch change. I will definitely be repacking the T/O bearing. I have read that moly grease is common on them. How hard was it to get the bearing open?

Can you get new throwout bearings for the M800 series or are we stuck with NOS?

Thank you very much!

Can anyone tell me where on the linkage assembly the detent (selector ball) is at?

Thank you. I was thinking scr additive was more important than they are.

Thank you all for the input! I have read the liners and seals are sensitive in this motor. It would be devastating to me to ruin the motir doing preventative maintenance.

Hello All, I am about to change the coolant and hoses in my M817. I bought Zerex original green antifreeze and am trying to find and equivalent for the Mil-A-53009 antifreeze extender additive that is in the manual. Is this an SCA additive? How much do I need? Do you flush the system? If...

Thank you for the input!

I am getting ready to replace the clutch on my M817. I am seeing button type and standard disk style. What are most using when they replace their clutch?

Thank you all for the help. It was as simple as the old gasket was still on the housing. I need to get some worklights 🤓

I used the narrow of the two gaskets as it said for the horrizontal nh mount. Was there another gasket other than the ring gasket for the canister? Thank You for helping!!!!

I did not see a casting anywhere in the adapter. I did see 5T-514 on the item description. I hope this is what is needed.

I hope you can tell from this. It is already dark here. Thank you for the help!

I have a M817 that I just changed the oil and added an oil filter spin-on adapter. It came with no instructions. I put the included gaskets on and torqued it down. I am now leaking oil where the adapter mates to the old filter base. I am guessing I failed to do something simple. Is there an...