Search results

Even do I'm not a big guy I felt I was to closely to the wheel so I put a Amprap seat for now..

Removed the lights and grill for painting wanted to check all lines for the coolers and AC. More to follow..

Remove the brush guard today will remove bumper next week as I prep the body for paint more to follow..

Got some time free over the weekend and check out AC and was able get it to cool , was surprised the low side did not want more than 20lb of pressure anything higher would make the high side to kick to over 300lb and make compressor turn off not sure is correct but is ice cold and the...

Yes working on that , I want to make sure they stay in place even on a roll over

Here is the switch

So I work on the battery trade as it was apart when I got it and put some new cables and a battery switch..

Ok thank you for the information will probably do that with in the next month , want to go over the truck and do some fuel mods and some more gauges just for a start...

Ok so there was never a 17 digit vin # very interesting the title has it ,will see what the tag agency has to say about I have to bring the truck to them to do title transfer...

Here is the other plate

I do not see the 17# vin on there but will check again sundsy

Does anyone know where the vin the is in the truck thx

Good information did not know it had one , have not look under truck but hopping this weekend , not sure weather I make it a dump truck or keep like that and run a dump trailer but will see once the Allison 4500RDS is inn it with the wet kit , may still strech the frame and drop a third axle...

I pick up the filters today and the fan switch NO 190 degree will try to work on it this weekend and will soon prepare for painting... of course it rains everyday here for the next few months maybe will wait for fall to paint...

Very good looking truck, thx for sharing it...

Thank you for all the info...

Ok so the oil filters and fuel filters are painted does anyone no the part # there is 2 oil and what looks like a fuel filter but also painted thx

Ok thx for the education Best Regards

I am fully aware that any 7" will work and the switch needs help , just wanted to know about the HMV leds , will incorporate relays on the system to take the load of the weak switch thx for the imfo.

That's a idea as I need to replace the bulbs, does the LED from the Hummers work are they like the markers where they have 12-36volts range or is there a brand you recommend. Thx willie