Search results

  1. Plasa

    Removing stucked brake drum

    Sorry to open again this thread. But how where did you put the bottle jack for front drums? back is perfect, but I have no idea where put the jack on front axle... Sorry.. :-( Christian
  2. Plasa

    Removing stucked brake drum

    Hi all! Solution with bottle jack worked perfect! Thank to all, now I need only get of the stuck oil drain screw from the hub cover.. With a lmtv you don't need a woman, every day a new task, never annoying :-) Christian
  3. Plasa

    Removing stucked brake drum

    yes, drums rotate freely... Thank you! Christian
  4. Plasa

    Removing stucked brake drum

    perfect! Thank you Sir!
  5. Plasa

    Removing stucked brake drum

    OK, seems that I'm not alone... I immagine you start on front/back side of the drum and then the other side right? Also use the springs for holding the jack? Thank you! Christian
  6. Plasa

    M1083A1 no CTIS Controller

    If ECU is missing you should not hear relays clicking, they are controlled by the ECU. You can put air in the tires even without CTIS. If some tire loose air you need to check why, otherwise you need a lot of air due air leaks.. Christian QUOTE="Mario, post: 2322009, member: 77603"] After 6...
  7. Plasa

    Removing stucked brake drum

    OK, will give a try. Did you put it only on 1 side, or on boths sides of the drum? was your's also completely stuck, no chance with hammer?
  8. Plasa

    Removing stucked brake drum

    Hi berend! Nice to hear from you! Where did you put the bottle jack? between drum and springs? Both sides? Christian
  9. Plasa

    Removing stucked brake drum

    Hi forum. I think I'm too stupid for this type of work, but I'm not able to remove both brake drums on my M10278. I use air from the emergency gladhand to release park brake wheels are of course removed, little rust between rim and drum, but nothing special drum is completely firm, no movement...
  10. Plasa

    M1078 abroad

    Well, I must admit that (I live in the middle of the mountains) the locker isn't funny when you need to drive a lot steepy tracks with a lot of curves. At the end of a turn sometimes gives you a kick in the ass to remember when engages again.... I do not know if I made a mistake when mounting...
  11. Plasa

    M1078 abroad

    Hi forum. Someone asked me to publish some more information about our truck and modifications we made, I decide to start a new topic with some pictures / stories.... Now 3 years ago we bought the M1078 from a german company that mounted the living box too. The inside of the living box is made...
  12. Plasa

    rim bolts, any civilian part number?

    OK, will try the bolts from JEGS, let's hope that they will fit... I let you know! Thanks! Christian
  13. Plasa

    Fmtv wheel studs

    OK, I will try and let you know! Thanks! Christian
  14. Plasa

    rim bolts, any civilian part number?

    Hello all! Does anyone have a civilian part number of the 18 rim bolts? I need to change the tires and want to have some spare bolts if one or more are rusted, unusable... Thanks! Christian
  15. Plasa

    New Arduino-based FMTV CTIS controller ROCKS!

    Thank you sir! :-)
  16. Plasa

    New Arduino-based FMTV CTIS controller ROCKS!

    That's right... ;-)
  17. Plasa

    New Arduino-based FMTV CTIS controller ROCKS!

    I buy mine always on digikey.com. They have quite all connectors you can immagine... Christian
  18. Plasa

    New Arduino-based FMTV CTIS controller ROCKS!

    Thank you sir! :-) I'm happy that it works as expected. Mine also works now for 2 years without problems. Sometimes if I go over 1500 m sea level the wet tank sensor does not close and the CTIS thinks there's not enough pressure in the tank. Solution is to deactivate the wet tank pressure check...
  19. Plasa

    New Arduino-based FMTV CTIS controller ROCKS!

    No, it's not possible because the entire pneumatic system is not able to check ad fill / deflate per axle. And there is only 1 pressure transducer for the entire system. Christian
  20. Plasa

    What have you done WITH your FMTV ( trips, Rescues etc) NOT: fixes, updates etc

    Enjoy every moment using our truck, it gives a sense of liberty and freedom in this weird moment of the story! Stay healthy and save! Christian
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks