• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. jplace1011

    M1009 Valve Cover Recommendations

    Does any one have any recommendations for New Valve Covers for my M1009? I’m going to switch the old ones out while doing some repairs. I want to get the right ones the first time! Thank you in advance. Sent from my iPhone using Tapatalk
  2. jplace1011

    M1009 Battery Disconnect Switch??

    I’ve noticed my battery lugs are getting worn from connecting and disconnecting them from the batteries for my CUCV M1009. I already replaced them once. Is it ok to use a Battery Disconnect Switch for when I’m working on my vehicle? This would be an effort to prevent wearing out my Battery...
  3. jplace1011

    How to Plug a Hole in my Fuel Filter Housing CUCV M1009

    The old Fuel Filter Assembly/Housing for my CUCV M1009 has a Round Sensor near the middle. The new part doesn’t have that Round Sensor. *I’ve been told it’s not needed, that sensor is for Fuel Pressure used with the Diagnostic System exclusive to the Military editions of the blazer. The...
  4. jplace1011

    Fuel Filter Issues for This Noob!

    I need some help and advice asap. I noticed fuel was leaking from the bottom hose of my fuel filter. I removed the Top and Bottom Valves, No. 5 & 17 on the chart, there didn’t seem to be any Seals for either valve. According to the TM they’re should be seals, No. 4 on the chart. I...
  5. jplace1011

    Fuel Leaking From Fuel Filter Drain Hose CUCV M1009

    I noticed the outside of the drain hose is wet. It’s the hose that is located at the bottom of the Fuel Filter. Nothing seems to be loose, I checked. I still have the stock filter installed. Any ideas what might cause it to leak? I’m thinking it could be these seals that go with the valves...
  6. jplace1011

    Door Panel Installation Problems Galore!!

    Is there a proper way or trick to installing the New LMC interior door panels on an M1009?? I place it over the silver handle first, the one that you pull to open the door. The Plastic Tabs/Clips that go on the panel and snap into the door just keep popping out of the door panel as soon as I try...
  7. jplace1011

    Correct CUCV M1009 Transmission Mounts??

    Does anyone know the correct Transmission Mount(s) for a CUCV M1009? What’s the Part Number(s)? This is the one I ordered on Amazon: This is the one I ordered from 4 Wheel Parts: I’m not sure why, but my mechanic buddy says the Black One (top pic) is wrong. Not sure why?! Someone on...
  8. jplace1011

    Question About Starter/Shims Installation

    I am wondering, when installing a Starter into my 1985 CUCV M1009, are Shims required? Not long ago the Old Starter was sparking when I started the engine. I discovered the whole starter was lose. The Cover was also lose and a Bolt was bent. We installed a New Starter, my buddy just had to...
  9. jplace1011

    Question About Bolt for Power Steering Pump

    We just installed a new Water Pump and a few other items. In the process we had to remove the Belts for the Power Steering Pump, etc. After putting things back together, I heard a rattling sound from the Power Steering Pump. The Bolt that tightens the Power Steering Pump onto the Bracket...
  10. jplace1011

    Proper Way to Clean 6.2 Engine (CUCV M1009)???

    Quick Question About Cleaning my 6.2 Engine. We just replaced a few Gasket and Seals for my CUCV M1009, 6.2L. I would like to clean the engine to determine that the leaks have stopped. What is the Best and Safest way to clean my engine? I don’t want to crack the block, destroy any...
  11. jplace1011

    CUCV Motor Mount Recommendations

    My M1009 (6.2 Diesel) needs to have the Motor Mounts replaced. What Brand/Type do you recommend? Any Links to the product please. Thank you in advance! Sent from my iPhone using Tapatalk
  12. jplace1011

    Question About Torque

    Quick Question about my M1009 6.2 Engine: (I’m still learning, so bare with me) I’ve never used a Torque Wrench, but I would like to use one for the bolts for the Oil Pan. I have a small oil leak and am thinking I can properly tighten those up first. I’m hoping that will stop the leak. I found...
  13. jplace1011

    M1009 Center Console Ideas

    I’ve been getting all of my ducks in a row for the clean up/restoration of the interior of my M1009. These vehicles didn’t come Stock with a Center Console (as far as I know). Does anyone has an ideas/recommendations for one? I don’t need anything fancy, just a place to put drinks and maybe a...
  14. jplace1011

    M1009 Starter Sparks

    The starter in my M1009 began sparking when I started it the last two attempts. I don’t know how old the Starter is, I’ve only owners the vehicle 2 years. I’m assuming the Starter needs to be Replaced. Could it be anything else? Also is there anything tricky about installing the New Starter...
  15. jplace1011

    M1009 Shock Recommendations

    I’m going to replace the shocks for my CUCV M1009. It has a 6” inch lift, not sure if that matters. I want to see what you guys recommend? Brand, Type, etc. I looked on 4 Wheel Parts and got the phone book! I mostly drive on roads, but would like the option of something decent for any...
  16. jplace1011

    M1009 Carpet/Flooring Ideas

    https://www.lmctruck.com/1973-91-chevy-gmc/csb-1973-91-blazer-jimmy-molded-carpet Instead of spraying bedliner, I’m thinking of installing carpet into my M1009. I’m curious: Did the M1009’s originally have carpet and what color was it? LMC has Black and Red Carpet Kits available. My front...
  17. jplace1011

    Question; M1009 CB Power Wiring

    I have a real quick question. I just bought a new CB (President MCKINLEY USA SSB 12/24V CB Radio) for my M1009. The instructions say to power it by running the small red wire directly to the positive battery post and the same for the black negative wire, run it to the neg. battery post...
  18. jplace1011

    Back Up Camera for M1009?

    After getting my windows tinted in my M1009, it’s been difficult to see out the rear window when backing up, in particular at night. Has anyone installed a Back Up Camera for their CUCV? I know they make Dash Cam/Back Up Cam Combos. That’s a thought. Sent from my iPhone using Tapatalk
  19. jplace1011

    Bus Bars Configuration Help PLEASE

    @Squibbly @cucvrus @Keith_J Today I installed a Pair of Used Bus Bars into my CUCV M1009. I labeled all the wires and Cables as to where they hook up. I think I made a Big Mistake. Video Below. When I went to hook the batteries back up One cable sparked and the end of that cable fried plus...
  20. jplace1011

    Here We Go Again Low Voltage M1009

    I feel like I’m just running around in circles here with my M1009! When I picked up my vehicle, to fix an oil leak, the mechanic said he had to charge the two batteries overnight. All because it won’t start. I decided to test the batteries today and here’s what I got: Off Front 12.53 Rear...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks