Search results

this gen. had set up about 8 months. had been working fine when last used. had moisture in the fuel tank, filter cans(cleaned new filters). injection pump had stuck plunger. was able to free the plunger moving in and out and rotating in bore now. getting short bursts of fuel to the injectors...

trying to figire out if one of ny 002s will be enough to start my daughters a/c unit. the RLA 17.9 seems fine but the LRA is 112.0. i think this is about 2 1/2 tons maybe 3?.

my recent gsa win this is my most recent. a reset with 2.2 hrs. still on it. sat for 6 years. didnt get the cover. wasnt cheap though. batteries were bad slaved it off another cranked right up purrred. everything works not used to that, sweet.

this is my most recent gen. referb. 430 hr. and 1600 hr. gens.

i have been looking a while with no luck for a original set of bows and top for my m116 generator trailer. i had an old m105 that i used the bow tops off of. i cut wood sides for the bows and cut down the tarp 14.5 in. on each end and 6.5 in. on the ftont and back, bolted the corners. anyway...

i just got this unit going i had some injector trouble and a bad fuel float switch. i have those taken care of for now. i just ran it for about 30 min. temp. got it up to 160 for a few min. the shutters never began opening. do i not have it hot enough? i shut it down and the element at the...

i have a 004 that has set for a long time. cant get fuel to the injectors. removed the top to look at the shut off sol. the fuel looks old and the cavity has a film on eveything. iam getting 24 volts engine cranking. anyone have any tips on what i can look for. anyone know of someone that can...

does anyone know what this gen. is? i cant find anything on the net. diesel driven, kw?

started my 002 up this morning. doing 62 htz. 125 volts warmed up about 5 min. and then rpm changed a little ,when i looked at the panel volts was pegged at 168 htz. 61 , i know i was thinking the same thing vr. i turned the voltage adjust and nothing at first turned it again and volts was was...

i have a 002 that the a/c reconnect switch is stuck on 120/208 3 phase. does anyone have one they can let go of?

i have two 002 mounted on a 103 trailer with the connection box on it that iam wiring up. these sets will be conn, up to my house. i have separated the neutral bonds at the gens. but in the fender mounted box the grounds went to the lo output termanal on the box. the neutrals go to the switch...

the voltage on this 002 acts like its hunting going up and down from 108 to 130 volts. this gen. did this and then stoped, but today it started again. i read a few previous threads that says theirs a pot or something on the regulator board to adjust i dont see where nor could i find this...

hello, does anyone know a good sourse to get some valve cover gaskets from? i would like to check the valve adjustment on mine. but would like to replace these while i have the cover off. thanks

hello guys , ive have followed you guys on the (towing the 105 thread) trying to get some ideas with my set up. i have a 103a3 that iam in the process of restoring along with a pair of 5kw gensets that will go on it. i towed just the trailer from s.c. to la. with no problems , but without the...

can anyone tell me any easy way of rigging some brakes on this trailer/gen. set up? ill only be pulling it with my pick up. i have considered surge brake and wondered if the surge head off a 116a would work for this heavier trailer. although i havnt figuered out how i would mount it. with an...

i just got my euc approved at hooks (red stone) and dont need it i have others closer. anyway if anyone is intrested give me what i have in it $220.00 cond. code b4

i picked up a m103a3 yesterday. iam trying to remove the the lunette to flip it. attacked it this morning with a mall wont budge. has anyone else had a stubborn one?

i won a gl auction on a generator and have to summit a euc form. i filled it out and plan on emailing monday. i started reading some freq. asked question part and it stated it would take up to 45 days for first time bidders to get approval. can some of you tell me how i can expect it to go. i...

new here some good stuff a couple 002s i just finished. the pe 95 was was also a restore.

can someone tell me how i bleed the brakes for this trailer? cant seem to find it in the manual. thanks