Search results

My vacuum hoses and part #9 (adapter) are rotten. My question is can the hoses be run directly into the regulator bypassing the adapter? Anyone know what size hose and how much I need? And what about 2 through 6, can that be left out also?

Are used soft doors worth much? I have a stack of them I got from drmo. Appears to be condition f , most with bad clear vinyl. Sent from my SM-G965U using Tapatalk

I recently mailed in my tag renewal for my 3/4 ton pickup. I have been running a B20 tag which is an appropriated tag for 20000 pounds. This truck is used to transport my green addiction from place to place. In the past the state has stated you had to buy a tag big enough to cover your total...

Does anybody have any experience with moving a S250 shelter with Transporter Airmobile Model 4003 Mobilizer? I have downloaded TM 55-1740-201-13 and 23P. I am correct that there is a kit needed to be installed on the shelter for this to work? Anybody have any pictures? Sent from my SM-T510...

X

I have this M109 with a whistler turbo that I am convinced the bearings are going out on. While reading threads about this I keep seeing all these post about how much louder these are than other trucks. Sitting in the cab I don't really see what all the fuse is about because I don't think it is...

Is there a way to save and /or print the pictures in posts? I have found the question asked several times but is is never answered. Everywhere else you can right click on the pic and save it. That seems to be disabled here.

Anyone here win any of the arctic heater kits that sold last week on GL.?

I though I would post my solution to stuck inner lug nuts. I used the geared lug nut wrench on the outer nuts with great success. That thing sure takes the work out of that job. My trouble started when I got to the inner tire. Nothing was working. I couldn't figer out how to use the torque...

Does the deuce have a rear axle oil seal like the one in the front axle? I am referring to part number 7521789. http://www.odiron.com/store/product_info.php?cPath=4_48&products_id=205 My rear axle is leaking gear oil. From the trouble shooting: DIFFERENTIAL LEAKS OIL Check axle seals...

My turn lights have quit working. Everything else seems to work with the possible exception of the brake lights (it is kind of hard to press the break peddle and watch the lights at the same time). I did a search and learned about the ground wire. The ground was loose but cleaning and...

Some of you may have noticed that a lot of the links in old posts don't work any more. While fixing my post in the CUCV FAQ I discovered the following workarounds. First I went to the old forum and went to the post. Clicking on the link there didn't work either, but I was able to find the...

resizing test

For everyone who wants to put carpet in their deuce, now it is OK. It is an approved field modification. This is on GL right now.

I have finally gotten around to working on my overheating truck and thought a good place to start would be to change the thermostat. At first I didn't think it had the rubber seal that you are suppose to remove and replace, but now I am not so sure. The TM pic looks like a split ring, but the...

I just got off the phone to schedule my appointment to pick up three shelter dollies I won at Montgomery, AL. They are listed as buyer loads. Well I have been buying from Montgomery for years. The first time I bought something after they added the "buyer loads", I went to a lot of trouble...

I think my PMD on my 98 GMC pickup has gone bad. I have been reading on the net for a while now and have decided I need one of the relocation units advertised. Anyone here know about the problem and tried any of the after market kits? also, does anyone have a link to the main diesel pickup forum?

I went to pick up my latest truck last Friday. We checked all of the fluids then pulled it off and got it started. Soon after we were on the interstate and pushing 55, I noticed the temp was pushing 230. I backed out of it and it went down some. We pulled over at the next exit and idling...

I was wondering what other regular buyers were seeing on their EUC time. I bought my 4th truck this year. I sent the paper work in 4 weeks ago. It went to battle creek 3 weeks ago. That is 15 business days. My first three took about 10 business days. I noticed someone got theirs in 7 in April.

It has been a week now so it is time to post my latest pickup story. This has to be my worst pick up since I started collecting this stuff 20 years ago. I will admit up front that we did some pretty questionable things, but we did make it home without injury to ourselves or others. We got off...