Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have 2 trucks to transport. Both together are prolly under 27,000 pounds.
Both are 39' long w/ a 2" space between.
Max height is 10'
Load is READY now... Call 626-233-1339 BRAD
Where is the proper spot to ask for TM Search help?
I have an 8' x 10' Ridgid shelter I need all the TM's for it ;
( I looked hard)
I am stumped...
I own a ;
S-715/T (*9)(MARINE CORPS) SHELTER 10-FOOT 5411-01-298-1661 REPRODUCTION/DISTRIBUTION FACILITY...
So the TILT trailer I am fixin' up for my M916 is getting a winch.
I bought two of those 18,000 lb WARN Seris 18 winches
a few years ago and now I have a use for one.
I need to fab up a proper mount. I obtained a piece of 2" x 10" channel
that is about 2.5" tall and is 37.625" long. I boxed...
So simple it might be, but there could also be some tricks or trick
parts I do not know about...
I am putting all new tires on my trailer. They are duals, 17.5 10 lug rims.
What bullet proof valve stems would you buy?
And what valve stem to put on my spare! Extended or stubby? ha!
So if you care to lend advise (or watch me make mistakes) my Notes / SS Blog is here;
ARTISAN's M916
https://www.steelsoldiers.com/threads/artisans-m916.122713/page-30#post-2269989
I have a NIB Military BC3 that I am putting in my M916 and pulling the bad BC1.
As I understand it, I have to...
Gentlemen,
If anyone has any constructive, factual input/insight, we would sure be appreciative.
We have a BC1 in an M916 that has a spun rod bearing. We need to refresh. Money is an issue. I ran into a Big Cam 4 engine that looks very promising. I am told a BC3 is an easy swap, what about a...
Guys can anyone tell me or link me to where I can study
the oil system for a Cummins Big Cam 1? Specifically I
want to know the exact path that oil flows throughout
the entire system. I bet ya there is an illustration
someplace, I can't seem to locate it.
Gents I have a Zeiman 20' Tilt Deck trailer that has 2- 10 Lug axles.
I assume the axles are made by Hayes (possibly a defunct company) .
Here is a picture of the ID label on the rearmost axle. I assume
each axle is rated at 23K EACH.
My question is am I hosed or can I get parts for these...
My 5 Ton is in Idaho, I am in L A.
The book says an M925A1 has a wheelbase of 179" .
I am correct that dim is from center of front axle to center of Rearmost axle yes?
So if tires are 49" in diameter the dimension from the front of
the front tire to the rear of the rear tire would be 19'...
Are there any SS members whom really know what they
are talking about RE Intercoms?
I landed on a apir of David Clark H3430 headsets AND a pair
of David Clark U3410 Belt stations.
Yes, I know this stuff is designed for ground use, BUT you know
what I own.
I want a 2 person intercom brain...
I found a way to look up and see Amphenol connector drawings.
So often I see a spec for a plug, like " MS3106R-20-4SX " but
I will not immediately know what it looks like or its dimensions.
Here is how to find this info;
1- Go to http://www.ittcannon.com/
2- At the top right of the home...
The truck I speak of is an M916 but I am assuming this question is generic.
In TM 9-2320-273-20 it states that all the relays "are identical".
When I read the description for each relay I see #1 thru #6 relays are
"Normally Open Circuits", but then #7 and #8 relays are "Normally Closed...
Guys I have a little Miller stick welder, like new,
that I paid $100 for a decade or so ago from a shop
that was growing and did not need this learner unit
anymore in Brea, CA. I am quite sure that this pictured
unit is what I have, it is 23 miles away at his moment
so I can not give 100% ID...
SCMVCC
Hey guys, TOMORROW, Sunday, is the monthly meeting / swap meet
of the So. Calif Military Vehicles Collectors Club. Come On Down and
check it out! If you have stuff to sell BRING IT ( You are required to be
a member to sell, it is only $25 bucks, you can buy a membership
on the...
I am considering getting a trailer in Herlong.
If anyone is considering getting stuff and needs it delivered
to So Cal PM me. SOON
Maybe we can parlay a good savings.
EDIT: SS member tinydragon2001 has a good way to accomplish
the below w/ less work. Tiny says further on in this thread;
"I didn't mess with the washer. I simply removed the arm on that air valve
by loosening the Allen head screw that holds it on, and the little
arm pops right off. Then I can...
Can anyone show me a device that will measure 10-20000Volts?
I mean how does the elec company quantify if there is "14,000" Volts in THAT line.
Do they have a like a lil monster Multimeter? Forget calculations, how is
it measured in the field?
July 12 —
SCMVCC Meeting
—swap meet—general meeting 11:00AM—
SWAP MEET and SHOW FROM 7am to 1 pm
See ya at;
AMVETS
14910 Los Angeles St.
Irwindale, CA
See ya in the mornin' !
UNDER NEW MANAGEMENT and I must say, they
are doing a GREAT job...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!