Search results

Besides Wolverine, who took my money 2 months ago, and won't answer phone calls or emails, who else sells a 24-volt alternator conversion kit for my A2 Deuce? Thanks for your assistance. DHennon

Besides Wolverine (hey took my money, won't answer their phone, or reply to emails) who else sells a 24 volt alternator conversion kit for my A2 Deuce? Thanks in advance fr your help. DHennon

I bought a 3 station Intercom setup for the Deuce. It is a MIC 3. It did not com with a fuse in the main control panel. Need assistance in locating 2 OR 3.

I installed a 3 station VIC-3 intercom in my Deuce. 2 stations in the cab and one in the cargo bed. I need to purchase a fuse for the main control panel. There was not one in the one I ordered. I know it is a 24v but do not know the amp rating or the length or part number. Any help would be...

Who is a good source for vinyl decals for the Deuce.? I am in the process of repainting

Haven't posted for a while. I need some assistance I have a M35-A2 and installed an Air-o-Matic system 3 years ago, and has performed flawlessly. When I drove it yesterday, the low air buzzer kept going off. It appears the air regulator on the driver's frame rail is dumping air. I checked the...

I am about to install a 10,000lb Garwood winch on the Deuce. I have installed the PTO and the shift lever mechanism. I feel I have the correct amount of "play" in the output shaft at the PTO. My question is: with the truck running, can I engage the PTO from the cab to make sure it is working...

I have searched through the various threads and am unable to find iformation with pictures to retro fit electric military wipers in my Deuce. There are a couple of threads showing how to raise the hardtop without taking it off completely, and a couple of pics showing fabricated electrical...

I have seen a number of posts lately regarding members purchasing a/c kits for their Deuce. I bought my Deuce in October, 2010 and purchased a new a/c unit from AUTOCAR in California, and had him ship to me here in Florida. It was a brand new unit and sat in the crate until this past March...

I had 2 of these made. One is on the lower right corner of the driver's door and the other on the side of the fuel tank. In addition to a lock on my fuel tank cap, I thought this might make a fuel thief think twice!

Here is my first stab at posting pictures and a tip on the site. I just finished replacing all the steel and rubber brake lines, M/C, Air Pack, wheel cylinders, wheel seals and re-packed the bearings. Following the extensive, " how to replace the seals" thread, and the potential for...

I read on the site the other day about using a low air warning light. I thought the government should have included this nifty device on all deuces. I ordered one from Saturn for $16.50 plus the ride. It took less time to install than to write this post. Great safety investment to SUPPLEMENT...

Anyone know the max working brake line pressure in a Deuce using DOT5? I found a company that will fabricate the rear rubber brake lines. :?: Thanks!

Here are my questions: 1. I am replacing all the brake lines on my deuce. I also am replacing all wheel cylinders, seals and repacking wheel bearing. I purchased several pre-bent brake lines from White Owl. I will bend up the ones they did not have. BTW, White Owl was the only source I could...

In the process of wheel bearing repack, seal replacement, and wheel cylinder replacement on all wheels. I have all the TMs at hand. Does anyone know how much a front and rear brake drum on a deuce weigh? :idea:

I am adding a Garwood 10K winch to the front of my wo/w M35A2. I cannot find in the TMs any info about how the winch engagement lever bracket mounts under the cab. I have looked through TM9-2320-209-34; TM9-2320-209-20; TM9-3830-206-34P. I am missing something. Thanks for your...

In the process of tracing an intermittent problem with the head lights. At times, hi and lo beams work, other times only the low beam. I replaced a very crusty-looking dimmer switch that at times would stick. still have the problem. I have the TM 9-2320-361-20 showing how to check the...

I replaced all the belts and hoses on my deuce, flushed the cooling system, and am installing a coolant filter. My question is this: Should I install the fan first, then the radiator, or set the radiator in the 2 holes on the bottom plate, tllt the radiator forward, and install the fan...

I am replacing all the belts and hoses on my deuce. In looking over TM 2320-209-20-3-2, page 13-252 the instructions refer to loosening the crankshat nut with a 1 1/8' socket, and then using a compressor pulley tool, (I have the 2 special wrenches) loosen the the outer pulley. My questions are...

Would a 12 ton floor press from HF be sufficient for pressing torque arm bushins in and out?