• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. R

    MEP-806A Low voltage/ low frequency problem ??

    Got my MEP-806a started today. Engine runs great !! But have a under voltage light. Frequency wont go above 51.5 hertz and the 110 outlet puts out 22 VAC ? I have been reading the TMS for over 4 hrs and checked a few things. The big issue I see in the TMs is they cover either or problems but not...
  2. R

    Letterkenny Resets Your experience . Good ? Bad ?

    I am looking for some input . I had bought 1 generator that was reset at 2.4 hrs ( Seems like a common hr time for them) It had 8 hrs on it when I bought it. Turned out to be a problem child and It took a lot to get it fixed. What have you guys seen out of them ? Was I just a odd duck with that...
  3. R

    Anyone have a picture of how the rear axles on a deuce locate to the rocker beams?

    Anyone have a picture of how the rear axles on a deuce locate to the rocker beams? have a weird idea. but without tearing into how my rears are mounted. I thought someone may have some pictures?
  4. R

    from MD to GA

    I'm not sure at this point when I will be heading south. But I will be going from Southern MD to GA to pick up a few generators. I'll be taking a f350 and maybe a 18 ft flar bed trailer. I can also bring stuff north as well but will have less room due to the generators.
  5. R

    anyone near Albany GA to pick up 2 small generators?

    I won 2 mep-831 generators that I need picked up in the next 2 weeks From Albany GA. Please let me know if you can help?
  6. R

    Anyone near Fort Gordon GA to do a small recovery?

    Looking at a small generator ( around 150 lbs) at Fort Gordon GA that may need to be recovered . Thank you!
  7. R

    2 ill mep-002a need help

    Ok I have 2 very low hr MEP-002s . The first 1 I just got running ( it has 11 hrs on it) and it runs beautiful !! But the AC Voltage Pegs the meter ! I get 145 volts at the 120 reciptical . on the 240 reading its at 292 VAC on the gauge. The R1 pot reads from zero when turned to the left and 1K...
  8. R

    Anyone know where I can Locate information on a MWO ?

    I have a MWO 5380527424 & P Applied on my M917 I have searched the internet to find its meaning and I find Nothing? Another oddity is in the SN of the truck as well as the markings of the truck are CF 8465 I have searched this as well and only find my posts on here to CARNAC with the trucks...
  9. R

    m920 broken axle

    Ok here is my delemia, I apparently broke a axle on my m920 driving it up the driveway last weds( driveway is 18% grade with 180 degree wrap) I had aproched in to high a gear and got the truck in a hop. I didn't relize it til today when I needed to move it that the drivers rear wheel was free...
  10. R

    CAT 7155 Manifold rebuild

    Ok after reading the Cat manual ( SENR7002) a total of 7 times,LOL I decided to build a test unit for the Cat 7155 transmission.I tested a few Trannies I had here and found 2 with Manifold issues.( The most common issue with the transmission) I went out in the lovely rain and pulled the manifold...
  11. R

    Some info on Cat 7155 Trans

    I just finished a repair on a M917 that required a trans swap . I had a rebuilt 1 from a GL auction and swapped it out. Well the rebuilt 1 was sitting in a crate for a # of years and things do get sticky.So after starting the truck and air was up I pushed the air button and all you could hear...
  12. R

    cat trans from Houston tx.to Ga rally

    I need to move a 16 speed cat trans about 900 lbs from Justin Wehrings (sorry if I spelled ur name wrong :- ( )to the Ga rally any help would be appreciated.
  13. R

    picture of starter wire hookup for mep003

    I just picked up my mep003 from Pa and all the wiring is removed from the starter. My phone wont let me view TM`s and our power and internet is still out can anyone e please post a few pictures of the wiring that goes to the starter to give ne a clue were things may go it would be greatly...
  14. R

    MEP005A throttle question ??

    Ok I'm doing a engine swap and the engine coming out of the 400hz unit has a throttle governer with wiring and linkage. The 60hz unit doesn't have it or any support wiring or any signs of ever having it. So I get on GL and look at pictures of the same 60hz generators (4 to be exact) and they...
  15. R

    Looking for TM for a MEP005A

    Ok I did several searches and coming up with nothing. Does anyone know were I can buy a paper copy? I'm doing a engine swap now and it seems there has to be a easier way to get to the gen to seperate it from the engine, than remove most of the electronics?
  16. R

    M1082A1 recovery

    Although not a painfull long ride like most have made, I was able to recover locally ( within about 60 miles 1 way) a M1082A1 today with the help of Powerhousedeuce and his significiant other, And Harley the Pup lol . Here are some pic's of the pickup. I do believe the M35A3 is in need of a new...
  17. R

    M35A3 Air assist cylinder repair.

    When I first picked up my M35A3 it had a steering problem that it was hard turning left , but easy right . It also cause my air buzzer to go off if you held the wheel to the left. it would drop from 120 psi to less than 60 in a few seconds.After some testing I found my air assist cylinder was...
  18. R

    M35A3 Tires , Something to keep a eye on .

    While getting my tires on my A3 swapped out today we found that in the front 2 tires ( we are still swapping them out and won't finnish til tomorrow) More so the 1 I had problems with losing air after a day or 2 , Was filled with broken rubber and the inner sidewalls were damaged badly. I have...
  19. R

    What is different with this M35A3 ??

    Lets see who has a sharp eye or knows the M35A3 look the best . Whats different with this A3 ??? 8-)
  20. R

    M35A3 Wheel to hub O rings

    I did a search and didn't turn up any part numbers or sizes. I'm doing a tire changeout this week and would love to have them in hand. Any help would be greatl appreciated !!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks