Search results

Does anyone have the Yanmar L60AE-DE Detailed Service manual in .pdf Thank! Mike

Sorry for the "RANT" yesterday! Brain slipped out of gear and brakes failed.

On a 1991 M936A2 there is a sensor or something screwed into the outlet of the fuel transfer pump on the driver's side of the block. It has 4 wires coming out of it. And, I do not have a picture. It is not shown or mentioned in the 2012 parts manuals..... What is it and what is its function??

What is the caster and camber for an 809 series 5 ton? Tow in is 0.13 or 1.6mm, need the rest..

I tried this in Classifieds but with little results. Does anyone know where I can purchase these clips? They hold the bulb in place on the 809 series work light and propably others.

What is PCOIXK ? I've seen it on several trailers here and no one seems to know what it represents.

Here is the Cold Start on a M 816 in action. It's a sunny 18 degree day The 816 had not been started for several weeks. I wanted to see what it did because so many on this site said it didn't do the job.. hmmm!!

For you guys looking for brake shoes for the Goat: Brake shoe kit NSN 2530-9333585, part #5705521 as listed in TM9-2320-242-34P is the same shoe and liner set listed for the Jeep M715. They are available under this number from Memphis Equipment. Remember to put the primary shoe (the long...

Is there a trick to disassembling the rivit/bolt that holds the wood to the stays?? I'll need to remove them all and was wondering before I start.

Can anyone tell me, with a M-51 or M-54, if the pan on an R6602 can be removed while the engine is in the truck?? Thank you!!

Put the M-816 to work today. Picked up a Troy Steam engine. It's an 11 inch bore and a 10 inch stroke. Weighs around 6000 lbs. My friend, 70deuce, brought his deuce and we loaded it up. The wrecker didn't know it had a load and the deuce hardly setteled in the suspension. The last picture shows...

Does any one have a picture of an M816 in CB Uniform??? Need one before I put the Navy markings on.....

Can someone tell me what 40-9/185 /\ HQ91 means or who it was. The /\ is a black diamond. Thank you

Does anyone know who carries the 4455A (GE) warning light (Amber) that is on the left front fender of the M816 and M543A2?

Workin' Cap'n Hook today. Took him fishen and he caught a Cat. I'm "restoring" this old D4 for a friend and had to move it. This is the easiest way. The front of the wrecker raised about 2 inches with the 5 thousand pounds or so on the hook.

Can someone (Maybe David Doyle) explain the X designation on the series 809 5 tons. Like the XM816 etc.

Several months ago my M816 developed a knock, a loud one. No drop in power, oil pressure or any of the standard indications. A light blue haze from the exhaust that wouldn't go away was all that was evident. Well, after narrowing down where the knock was, #3 piston, I disassembeled it. I'm...

The TM says to assemble the oil cooler you must align the manufacturer'e index marks. Cool, I have one mark (0) on the housing nothing on the element. Now what? Anybody indexed their oil cooler lately? Cummins says the older models didn't have to but the manual says do it. It's an 89 so it's not...

Any one know what thickness gasket is reqired to achieve proper gear spacing between the transmission pto and its drive gear in the transmission?

Where can I get the valves that are on the 2 1/2 and 5 ton emergency and service air systems? I've got a couple leaking and need to replace them.