• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. JAsher45

    Vaccum pump

    well after months of of driving my M1009 with is shifting on the governer. i got some time too look at it. the first thing that i checked was the vaccum pump. hooking the gauge directly to it, though all rpms it bounced back and forth rapidly between 5 psi and 5 in of HG.. so i found the...
  2. JAsher45

    Igntion switch question

    I am working on finishing up the work on my 86 k-20 so i can roll my m1009 on the shop for the winter for a complete 10/20 reset. my question is to do with the ignition switch on my K-20. I can not turn the key to the ACC postion. my question is where and what should i start looking for? the...
  3. JAsher45

    1009 body tub

    this winter i plan on starting to do all the body work to my 09. the weather and the roads here in iowa have not been to kind to my body. The cancer (rust) has got very bad on the floor pan,kick panels fenders and just about every where you can think of on the tub. i was thinkin about geting...
  4. JAsher45

    CDR Valve air oil seperator

    i have been thinkin for awhile about something a seen a few months back in diesel power magazine. in the article they were installing a crank case ventalation filter for a 7.3 power stroke. the kit is basicly an air/oil seperator that keeps crankcase oil from getting back into the intake. the...
  5. JAsher45

    cylinder head casting numbers

    Hey guys, i was wondering if anyone knew the casting numbers for the newer cast cylinder heads for the 6.5/ 6.2 that had the inproved cooling under the precups. I am just doing some research before i pull my heads off.. .. i am getting combustion gases in the cooling system. but no coolant in...
  6. JAsher45

    Pulleys for power

    this past week at work i was running some very powerful 6.5s on the dyno ... 5 in a row 190+hp and could not figure out why they were running so good. i got to looking closer and noticed that the pulleys were different on the water pump and crank... the were Aluminum alloy not steel. i...
  7. JAsher45

    gauge pods

    Does anyone out there know of a company that makes guage pods that fit the pillar. i have been wanting to add a few more gauges and want a cleaner look then just mounting them below the dash.
  8. JAsher45

    the Different 6.2 intakes

    does anyone know of any preformance difference in the intake on the CUCV intake versus the one on the HMMWV 6.2/6.5 the only tow things that i can see that are different is the CUCV design has two ports for the CRD valve lines and the intake is about 1.5 inches taller with taller runners.. my...
  9. JAsher45

    head lamps

    I seen these lights a few months back wile doing some training at the RRAD. they were factory from Oshkosh. I will tell you they are BRIGHT. i am going to see about getting a pair to put on my M1009...
  10. JAsher45

    the Deuce market

    well this weekend was a bitter sweet weekend for me. We had to get all of our M35a2's up to 10-20 standard load all BII and turn them in so we can get our new trucks. hate to see them go but that just means that they will be heading out on to the auction blocks in the near future. Many of them...
  11. JAsher45

    trailer plug wire woes

    tonight on my M1009 as i was moving my boat i noticed i my tailer lights were not working properly... i have never messed with them. it was retro fited when i got the truck from a military plug to a 6 round plug here is where my issue is brake lights and turn lights work fine... turn on...
  12. JAsher45

    fuel filter issues

    i have run into another problem with my m1009... it is the usual air in the fuel lines at start up. i have tracked down the source of the leak to the seal on the water drain tube on the fuel filter housing. My guess is that it has been bad but with changing out the filter and running the new...
  13. JAsher45

    And the work begins

    well I got home from the sandbox on the first and have begun to work on my M1009... after doing a walk around and a PMCS it is amazing how much the iowa weather will take it's toll on a truck. many surface rust spots to attend to where there were rock chips in the fenders. I went to post to...
  14. JAsher45

    m1109 AC

    he guys sorry i havn't dropped any posts in a while. been busy getting ready to get out of here and training my replacement.... god help me! but any ways here are some pictures of a CUCV that i was walking by. the ac system in it is part 5 ton part HMMWV
  15. JAsher45

    mufflers

    what is your guy's preference on mufflers. I just got an email from my dad who is taking care of my M1009 while i am gone and said everything is working good except a couple rust holes coming through the muffler. I am thinking i will go with flowmasters 40 series. what are your guys thoughts
  16. JAsher45

    route clearing trucks

    i took these pics the other night on my way to the chow hall. I have walked by them it seems a million times in the last 10 months. they take a lick and keep on ticking. some you will see have some minor damage from IEDs.
  17. JAsher45

    looking for a few parts

    i was hoping you guys could give me a hand on some info on to locate the following parts for my M1009. i am still over seas for a couple more months but can't wait to start driving my CUCV with it's fresh paint 1. Dash pad. mine has the usual cracks in it and is starting to fall apart. 2...
  18. JAsher45

    Bradley pics

    here are a few pics i took last night of one of the patrols that were lined up outside our motor pool. have no idea why they parked there but good time for a photo op
  19. JAsher45

    Blackwater armored truck

    here is a truck i ran into the other day. i didn't know which country or force it belonged to until i seen blackwater guys getting out of it. it sounds like it is cat powered, not quite the same turbo sound from the cummins. but it was fast moving..... more get up and go then the M1114's
  20. JAsher45

    NEED an NSN for CASE 680L

    I am currently stationed in LSA Anaconda and i pulled a case 680l out of DRMO that the airforce turned in with major hydro leaks... two bad o-rings.. the problem lies in that the nsn on the equipment is for a cat backhoe. any leads would be great cause i can't find the damn thing in fed log...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks