Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Does any one have a list of the parts that you can go to Napa,Carquest or orlies auto parts I had one at one time can’t find it and I’ve tryed to search on here with no luck on finding it
I have noticed that when your are at cruising speed the oil pressure is over 120 and I have changed the oil filter to see if that was the problem. it idles at normal pressure per tm I have recently changed the sending unit and it is the correct one being I have the 120 gage
I have a buddy that is trying to straighten out a wheeled apc that has theDetroit 6v91. the yahoo's at another shop that somehow changed the transmission in it and had the heads off the motor and who knows what else has been tinked with for some reason. so the the police department took it...
Has any one made or know what I will need in length to build a set or ramps to load into the back of my m35a2? I don't know how long to make them or what boards I will need to make them work safely. The truck os still at stock height Any help would be greatly appreciated. Thanks again Thomas
Has any one ever figured out what the dipstick is calabrated in is it Qt. or gal. or is it a precentage of what is spose to be in the crankcase. I have looked but cant find anything on what the numbers mean on it. I allways just add till it says full but it would be nice to know what it means so...
The wiper blades on the truck was missing from the driver side so i just swapped the passenger to the drivers and got around to putting new arms and blades on it. They are both the same and the passenger side works great it stays on the glass but the driver side over laps at the bottom by over...
The main fuel line from the tank started spaying right there at the frame where it goes thou.aua What is the best thing to fix the line with. does any one know what the fuel pressure is in that line?
For the fourth of July at the dirt track we did a thing for the vets to thank for the service that they did for our country. We took the vets on a ride around the track for a few laps while they shot fireworks. I never have saw the fans clap and cheer like they did when we all where riding on...
The knob that holds the driver side arm on the ball socket keeps falling off but the one for the passenger side can't from its in behind that one. Does any one know of a easy fix instead of buying the whole arm? any one rig one or know of one that you can get from a parts house?
Can some one tell me what size the bolts are on the back of the fdc where the brace bolts up too? There are 2 on there and both have become MIA somehow?
I have made a easy pump set up for wmo or atf. Here all i used for it was a air powered pump from harbor freight $80, 2 goldnrod filter housings from northern tool $40 apiece, 1 golden rod mesh strainer $18, 2 3/4in. x1.5 in. pipe $3 apiece, 1 3/4in. x male hosepipe thread $4, 1 50ft. hose...
Ok i was driving along in the rain and i kept seeing water coming in and started looking and found that the water was coming thou the frame around the glass and back around. I found this by bubbles at the frame and glass as i rode down the road. I don't want to take the easy way out by just...
OK i have a idea i don't know if it will work or not. If you take two 12 volt lights wire them in a series and use the last light in the ground with the first one as power. i know ill have to get lights that don't ground out at the base it has to have the two wires on it. Wouldn't it pull a...
I have a hard top on the truck now but I wanna know is there any difference in the tops as far as sound, heat and water tightness. It quieter with the top off or even if i have the windshields open with the windows down. The top seams like its hotter inside than out with every thing open...
Can any one tell me what the rod with the hooped end on the drivers side is for. It is located on the top right behind the hood latches and in front of the windshield. I have yet to figure out what purpose it has there.
Ok i saw a video from another post and they where talking about the generator had a seprate post that put out 12-14 volts. Have any of yall used this post for power. If it will put out enough power for a CB or a way to plug up GPS inside the cab instead of using a power converter. Just wondering...
The front grill on the truck on the right side always twist outwards and the hood latch comes off. i have checked every bolt and tightened it with a impact. none of the grill, bars, or hood is bent. When i check all of the bolts after it does it they are not loose. I don't know what else to do...
I replaced the master cylinder today and went about bleeding the brakes like always had worked farthest away to closest. Now i don't have a good pedal now. Is there a wrong way and a right way to do this? and another question i have where does the vent tube on the top tie in to on that line...
any of of yall know what is a real close to or dead on color for the tan that the govenment paint is. im trying to repaint a rim i got from jim henrys. or is there a better color to go with that will match up better. just let me know id like to know where to buy it or would i be better buying...
i would like to get a mule but i dont know how much is to much for one i dont wanna over pay or get a hunk of junk. is there any tell tell signs to look for when looking for them to find out if they are worthy or not. i know they are geting harder to get but i wanna get one before they are gone...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!