• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. Jayco36REQS

    NHC-250 Fuel Injector Removal / Clean / Re-install Parts List??

    Hey, What are the recommended parts / Tips / Tricks when removing, cleaning, and re-installing the clogged fuel injectors on an NHC-250? Any guidance/Tips from those who have done it would be greatly appreciated! Thanks!! :beer:
  2. Jayco36REQS

    Fuel Issues....

    Hey... I have a M923A1 that won't start.... It hadn't been ran in quite awhile, and the last time I drove it, it was sluggish and slow throttle response until it got warmed up. I'm guessing the fuel was getting bad.. (after thought now) - I've replaced the main fuel filter - Drained the tank...
  3. Jayco36REQS

    MEP-803A issue... Won't start... HELP?!?!?!

    I have a MEP-803a I got from a gov auction just over 400-hrs on the meter... and I can't get this thing to start on diesel. Some notes: - I serviced it, all new fluids, new filters, checked the fuel tank for grime or sludge, and put new clean diesel in it. - The fuel pump sounds noisier than...
  4. Jayco36REQS

    Two Auction MEP-803A Starting Issues..... Different on Each unit.. HELP??

    I bought 4 auction MEP-803A's.... - (Unit #1) Added new fluids, filters, inspected the unit, fixed fuel return line, new batteries, 5-gal clean diesel... Dead cranked fine, no leaks, charged fuel system 4x with 30sec pause between. Then cranked it up with a shot of either in the air intake...
  5. Jayco36REQS

    M923A1 Fuel problem... Won't start!

    I have a M923A1 that is a 2010 rebuild. It started having fuel problems awhile ago where it would chug and spit and no power until it got warmed up. Once warmed up it ran fine. I don't drive the truck much... But this went on for several months. Then I went out to move it, and it it started, but...
  6. Jayco36REQS

    Home 220v single phase -to- 220v 3-Phase conversion.....

    I just bought a ELAMS Tactical Command Center with High Speed Wheel Set.... The ELAMS comes with a 20KVW 3-phase generator, Two 36k BTU AC/Heat units, breaker box, 8 sets of lights for the interior, and many 110v outlets. What I'd like to do it be able to power the ELAMS from my home under...
  7. Jayco36REQS

    How long is it taking for GP to post wire transfers?

    I'm in a time crunch... Several questions from experienced GP buyers - How long is it taking for GP to post wire transfers? - How long after that is the Transfer release paperwork posted? - Anyone familiar with Fort Polk... How much lead time should I anticipate in order to get an appointment...
  8. Jayco36REQS

    Ft Polk Pickup

    Greeting all.... Anyone close to Ft Polk who could help with picking up a Mobilized Expandable Shelter? It's on it's dolly, and looks to be good tires (at least they are holding air, and no signs of major cracks or split tread). It's my first time picking up from GP, a 13hr drive from FL, and...
  9. Jayco36REQS

    Ft Polk Pickup

    Greeting all.... Anyone close to Ft Polk who could help with picking up a Mobilized Expandable Shelter? It's on it's dolly, and looks to be good tires (at least they are holding air, and no signs of major cracks or split tread). It's my first time picking up from GP, a 13hr drive from FL, and...
  10. Jayco36REQS

    20ft shelter w/ High Speed Dolly Ft Polk, LA - to- Kissimmee, FL

    Hi, I need an estimate to haul a Mobility Systems Expandable Mobile Shelter w/ High Speed Dolly hauled from Ft Polk LA -to- Kissimmee, FL. Est 29ft x 8.25ft x 9.5 ft... around 8500lbs. Just trying to decide to go get it or have it shipped. Thanks! Gary
  11. Jayco36REQS

    TM for ELAMS-TOC??

    Anyone have a TM for the ELAMS-TOC, ELAMS-58202 (aka AAR Expandable Light Air Mobile Shelter Tactical Operations Center), and the High Speed Mobility Wheel Sets (HSMWS) ?? I've searched all over and can't find a thing...
  12. Jayco36REQS

    M939A1 Fuel Pump Filter issues

    Ok, So I've narrowed my running (and now starting ) issues to bad fuel filters. I changed out the primary fuel filter.. cleaned EVERYHTING, filled the filter bowl and filter with clean fuel... went to remove the PT pump filter and I can't get the slotted bolt out for the life of me!! Anyone know...
  13. Jayco36REQS

    Rough idle troubleshooting.... HELP.

    Ok, so I went to move the 5-ton the other day, and it was idling rough. Here in Orlando FL the temps are always mild.. so it's not a cold start issue. I let the truck idle to air up the brakes to 120psi, and put it in gear, and it felt like I was running on 4 cylinders.... low power, and rough...
  14. Jayco36REQS

    Shipping a 5-ton seat assembly..... Who to use?

    I need to ship a 5-ton seat assembly from Orlando, FL to Bishop, CA..... Who to use? I have it in a wooden crate, 55x30x30... and 115lbs. Anyone have a suggestion?
  15. Jayco36REQS

    Old Town in Kissimmee, FL 29 Nov.... Sunday Truck Car show.

    I talked to the Car Show event coordinator at "Old Town" in Kissimmee, to see if Military trucks would be welcome at the Sunday night Truck / 4x4 car shows. He said sure.. come on out! So I plan to head over around 430 or 5 pm this Sunday, 29 Nov. Any guys in the area want to come out and...
  16. Jayco36REQS

    What is this???

    Anyone know what this is?? It's made of aluminum, and about 2x3 feet in size. I'm guessing it's a platform for something... but what??
  17. Jayco36REQS

    1,040 mile trip.... no problems!

    Well my truck made the 1,040 mile trip without any problems.... I had around 8,000lbs in the bed, and towing 9,000lbs. Here is a pic of my M923A1 truck and M796A1 trailer at a scenic view in TN.. - It averaged 68mph on the flat areas, and got as low as 35mph on major hills (like Jellico mt)...
  18. Jayco36REQS

    NEW to the Kissimmee / Orlando area... Looking for other MV owners to meet.

    Just arrived in the Kissimmee / Orlando area, and looking for other MV owners and get info on any events in the area. :-)
  19. Jayco36REQS

    How much EGT is too much EGT??

    What is the recommended max EGT you should stay away from?? Just did the dual fuel rail to the back of the motor using 5/16" lines... (same as stock), and dropped to a #22 fuel button... (stock was a #32), and added a digital Pyro. I figured red led numbers was easier to see than a dial gauge...
  20. Jayco36REQS

    Compression Fitting for Fuel line??

    Anyone tried using compression fitting on their Fuel line on 5-ton? I've used them on gas fuel injections... but haven't seen anything about it here?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks