Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
So recently I had the privilege of picking up a genset from Abilene KS for @Light in the Dark . A buddy and i were already going, and the plan was to simply add the genset to the load and drive the 50 miles or so and drop it at Fastenal and then go have a steak.
I had some pelican type...
I've got a 10kW DC APU generator with a HATZ 26hp engine.
I've jumped old chevys at the starter using a screwdriver, main positive post to secondary empty post.
The partition around the main positive post on this one seems designed specifically to prevent that. Maybe there's a good reason for...
I'm looking for a plain Jane mechanical transfer switch to be used to connect a MEP802 to a house for use during power outages.
The primary user would be a >70yo woman, when the power goes out.
I figure someone here has one they like...
Farmers in KS use 939series trucks as silage trucks. One of them had an alternator go bad last fall and needed one right then. I sold him the one off my M936A2.
So now I need one for me. I seem to remember there was an aftermarket option that wasn't terribly expensive and wasn't a particularly...
I don't have an 805.
I know some of the more advanced larger machines have on board resistance in order to artificially create load and prevent wetstacking. Is the 805 one of them?
In answer to my own question, it appears not. I was able to find references to 805s that have wet stacked...
NOS LMTV rim, 1 available - $125
HEMTT rims, bare, 2 available- $200
HEMTT rims with mounted 16.00 XZLs, 6 available- $600 each
5ton combat rims with 14.00 XZLs, 2 available - $450 each
I read through the troubleshooting portion of the -10 and didn't see this explained.
Here's what I've got:
MEP802 340hrs , runs fine when set to 208 3phase. Runs fine when set to 120v single phase. Convenience outlets work fine in both positions. No fault lights. Gauges wnl.
Copious black...
I took this in trade on a safe sale. The guy had three of them identical, stored inside.
Now you know what I know about it. I haven't done anything at all to it other than unload it. It'll be stored tarped so it won't be getting rained on. It's pictured sitting on a defunct drawer safe that's...
I've got an 802 and hooked it up to the house. Manual transfer switch. 50 amp 14 50 NEMA plug, 40 amp breaker. 6/4 copper cable.
Red and black to legs 1 and 3, green to ground, white to neutral. Phase and voltage set to 120/240 single phase.
Power on, contactor closed, switch the house to...
I've got a garden variety 2dr soft top M998.
I've also got the pictured mile marker hydraulic winch and mounting plate.
Presumably I need a couple of hydraulic hoses. What else?
Are there instructions somewhere in the TM for how to install?
Anybody changed the valve cover gasket on one of these? Got a part number or recommended part?
I've got black permatex. I'm thinking a solid gasket is probably better.
Edit - part number is 3905449.
Thanks
Can anybody pick up a safe in Groton and move it to a storage facility nearby or maybe the freight terminal? It's on a standard pallet and about 60" high.
@Suprman
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!