Search results

Hello guys, We have found a M35A2 with a MF LDT-465-D on it , sadly the whole alternator is missing along with its bracket... Can anyone please let me know the correct size(s) from the three bolts that secures the mount to the engine block and the two that secures the alternator to the mount...

Hello guys, I am trying to find the correct type of the starter and its bolts from an 1987 LDT 465-1D as both are missing from the engine... Thank you !!!

Hello guys, I am looking for one worm shaft , NSN is 3040-00-328-8862 part # 795462 Also for a brake drum , NSN 2530-00-740-9925 part # 7409925 And for some washers (x4) NSN 5310-00-740-9977 part # 7409977 Thank you

Hello guys, I am trying to find what size and thread are the correct bolts for the floor inspection cover ? Thank you!

Hello guys, I want to change the oil in my front axle at my M1008 and I have some questions for the experts ! what oil should I use ? do I need to use a gasket again ? And if so any idea from its thickness and material ? do I need to apply some sealant to the diff cover ? Thank you VERY much !

Hello guys, What is a fair price for a NOS 5 -ton front Garwood winch complete with fair lead still in crate (no cable/mounts) ? Thank you

Merry Christmas everyone !!! I want to change the coolant (actually tap water) from my M1008 ! Last time I have it run for exactly 20 minutes and then I have open the radiator drain bolt to drain . Can you please point me to the right direction guys ? Thank you!

Hello guys, I was finally able to have my IP removed for a rebuild. Now rebuilder says that the rebuild will cost a lot more as the counterweights are stuck for sitting too long without working. Can anyone please confirm if this is correct ? Thank you!

Hello guys, I have found some Braden winches from a M911 HET , they are 45k rated Braden hydraulic winches , from a quick look seems that the hydro motor can be removed to convert them for PTO...Anyone familiar with these winches ?Are they any faster than the older regular Garwood drag winches...

Hello guys, I have six 45k rear winches for rebuild ,all the brake drums are badly pitted , I have clean one on a lathe but I have to remove at least 2mm from it to have a nice smooth surface.The wear limit is very tight on these (from 5.503" to 5.497")...So can I still use them ? Thank you!

Hello guys, I am trying to remove the worm shaft , I have try to hit it with a 4.5kg hammer (wood block used between shaft) but no go...I have read both TMs and they suggest different ways to remove the worm shaft :roll: Can anyone please share his own experience ? Also can anyone suggest a...

Can anyone please share the specs of the bolts that secures the seat belt mount to the floor under the seat ? Both are missing on my truck ! Socket size , length and thread it would be awesome !!! Happy new year guys !

Hello to all forum members, I have tear down an M125 front winch (same as M543 wrecker rear 45k winch) this one is made by Garwood, the big brass gear is in very good condition , sadly the worm shaft is pitted in the contact area and also at the seals areas so it is junk.I found an very good...

Hello all !!! I am trying to remove the drum from an M62 wrecker rear Tulsa winch...I have remove several in the past and all came with almost no effort... But not this one...It is so badly stuck that after I have hit it hard with a large hammer (wood block between drum!) it moves very slowly...

Yep, I open the M125 winch (identical to wrecker rear winch) , I drain almost 12 liters of mixed black oil with grease and the bull gear is black in colour !!! I trying thinners on it but no luck the coating seems impossible to remove... -Any idea how to clean this ? - Maybe they have put...

Dear fellow members, I am trying to find the actual weight of these winches (found 2000lbs w/o cable but I am not sure if this is correct)... Any help it would be just great! Thanks!

Hello to all, Recently I was bought an 45k Garwood winch from an M125 10 ton (M125s have an wrecker 45k lbs rear winch installed in the front with a smaller dia sprocket)... I am trying to remove the shear pin (it was intact not broken) with no luck : Even cotter pin was present , I have it...

Dear members, I am trying to start after some months my M1009 blazer , we do have fuel delivered until the fuel pump but the no further fuel delivery (read fuel pump bowl & injectors) we also have trying with the pump valve cover remover and pulling the fuel shut off trigger but again no...

I am trying for some info about which series of trucks come from factory with aluminium ones and which with steel ones ? M39 series seems to have aluminium ones , not sure for the rest... TM 9-2320-260-34-2 (6/94) states the following : 16-5. FRONT WINCH ROLLER MAINTENANCE (Contd) NOTE...

I found one 5ton winch that its shaft end (from the pinion side) stick out of the housing and is also splined ??? Never seen that before...Any ideas about its use ?