Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
When I press the service brakes, I am getting air hissing out of the vent hoses behind the cab. I'm guessing its a torn diaphragm on one of the brake cans. What is the quickest way to diagnose?
Wes, if your watching, this pic is for you lol
Anyone with a 2007 or newer able to answer a few questions about their AC system?
1. Looking for the part number on the compressor? It should say TM16-XD
2. Part number for the TXV valve located on the firewall near the heater core. It should say 040138-125
Here is the parameter configuration file from my 2002 MK23. This is useful if you need to replace your dead ECU with a new one. Click this link https://www.dropbox.com/s/fd0h7fmvj418ag5/9SM03523_ECMREP_2020-02-18_18.37.38%20MTVR%20Stock.xml?dl=0
Also attached is the 355/410 hp flash "tune"...
I have filed 3 small claims suits in my entire life and all 3 have been against GP. 2 of them were for not sending me the SF97 within the promised 60 business day time frame. The most resent(see picture) they offered me $500 to settle out of court and I accepted because I received the SF97 4...
Went to change the power steering filter and I think it's missing something. I think there should be a washer or something holding the filter down.
Sent from my SM-G930V using Tapatalk
I've been trying to diagnose a non op CTIS system. I used the DANA software on my laptop and plugged into the computer. The software says that the pressure switch is "open" even when the tank pressure is full. I pulled the switch and bench tested it and its working. I put a jumper wire where the...
I pulled off the hub to replace a bad seal and found this. The best I can tell is the the a planetary gear got hot and seized which spun its axle. The reason I think that is because there were no large debris. I guess a large chunk could have gotten ground up into fine particles or it drained...
I made a video showing a couple tricks to mounting a Michelin ZXL on a wheel with a bead lock. The hi lift jack and ratchet strap to the rafters is the best method I've found. Sorry for the poor quality video. I'm not the best with a camera
https://www.youtube.com/watch?v=ZWAb41hbNHI
Here is a...
I know the MTVR has the LCD diagnostic screen but wondered if anyone has used a diagnostic computer to test ctis, etc. J1939 is new to me and don't know all whats needed
Bought and paid for a trailer on 9/27/18. Picked up 10/5/18 and still no sf97. I've contacted GP several times but they are no help as usual. They just keep telling me to wait. Its been 101 calendar days and 62 business days. Wondering if I'm the only one. This will be my 5th sf97 and they've...
Picked up a M322 trailer and hooked up the glad hands with the truck not running. The primary and secondary air gauges showed 110 psi but very little air flow was coming out of the emergency glad hand. Started the truck and then had a lot of flow. The trailer air system has a few very small...
I searched and didn't see a lot of info about this so I will share what I know. While I had my injectors out I adjusted the valves and checked compression. I was going to use a old hollowed out injector but I bought the proper gauge set.
Cold engine, batteries fully charged, all the injectors...
Went off-roading a few months ago and on an extreme angle I think sucked some air. The truck never died but sputtered for a while. The rest of the day it would intermittently
sputter again on angles. Drove it home with a slight lack of power due to the sputter. Came home, change the secondary...
Has anyone found a good alternative wheel and tire for these trailers? They use a 15.00 X 19.5 tire which is about 40" in diameter that are no longer available. It looks like a 19.5" dually setup might work.
BTW this if for the M989 trailer, NOT the M989A1
I broke the turn signal handle on my steering column. Looked on the auction site and there are a few variants. Will any of them work on an A2? I'm shocked with how expensive they are.
I bought a spare dogbone and went to match it up to an existing dogbone that's on the truck and the new one is 1" longer in length than the existing.
The pn# that's on the truck is 8728126 and is 24" long
The new dogbone pn# is 8728129 and is 25" long
I checked with my brother and he has a...
There is a bronze type filter/ restrictor on the air inlet. I'm making some fan mods and wondered if I can eliminate it?I switched the filter to the outlet side that goes to the fan and a lot of air now comes out of the shutter stat air weep hole
Sent from my SM-G930V using Tapatalk
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!