Search results

I acquired 6 wheels, I believe FMTV whwels with 395/85r20s, to replace my split rim setup on my M51A2. I still need one more for a spare. The question is how to remove the valve stem? I have disassembled the wheel, but looks like the valve stem is hold the wheel to the bead lock. What am I...

My M51A2 transfer fuel pump started getting very weak. I can hear it cut on but not really pumping. But truck cranked fine. Then truck stopped cranking. Batteries dead. Had them in the truck a years. Walmart 34N 800cca. Charged batteries. Only one would charge on the machine. The other would...

My M51A2 runs good. Still has the old NDT tires and everything else looks stock. The dog bones look ok, no separation. When I first got the truck the truck would do the same thing, but I believe it was caused by tire pressure being low. I was traveling roughly 45 mph and hit a bump in the road...

Picked up 3 14.5r20 XL from a guy. He said they wouldn't fit what he got them for. 2 of the 3 look good. One has a good amount of dry rot. Found a place that would work on split ring rims. Get there, that say they don't have the right tubes and the flap that came with the tire won't work. I...

My M51A2 brake lights work, but the brakes will not turn them on. I haven't been able to track down a switch. What signals the brake lights to come on when hitting brakes?

Mep002a trouble shooting My mep002a has been running without many issues at 1993hrs. Today I crank her up. Switch fuel on, sounds like a fuel pump might have took a dive. Not making the normal ticking noise, more of a zinging. Try and crank her. Everything as normal until I release the start...

Picked up a M51A2 from Kentucky Foresty, they said the local fire department has used it but it's been sitting for several years. Got it plus shipping around $3500. Doesn't look like it's missing many parts. Front driver side panel, winch driveshaft, and rear pintle. The exhaust is rusted out...

I live near Lumberton, NC. When Matthew hit we had a mep002a that ran but would not produce power. This time I was a little better prepared. I acquired another mep002a that ran from day one and produced power. When I went through the fluids I didn't realize it was missing the oil spring. I went...

I recently bought a mep-002a in rough condition. Missing a couple of fuel lines and the voltage adjust switch. I was going to go through it just to make sure it's not worth saving first. I've pulled one fuel pump and clean it out. Was going to check to see if it worked. Hooked up two...

Hello, I have been checking yalls site out. Its nice all kinds of info out there. I have a M-715, but would like to get a deuce or 5 ton. But not right now, iam planning on going active duty soon. I have drove the 5 tons a Ft Hunter-Legget, CA. and I got payed for it!:-D