• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. V

    Driver Fender

    I need a driver rear fender for Humvee without air conditioning vents. If you know where one is please let me know. Thank you !
  2. V

    What do these attach to?

    Can anyone tell me where these attach for my parking brake system. I don’t have a vehicle to look at and my disassembly pics don’t show . The frame or the underside of the body?
  3. V

    Fuel Tank Question

    I've looked in the TM's but I cant find out if the HMMWV is equipped with a rollover valve or not. Does anyone know and if so which part is it? The white plastic thing is shown as a vent.
  4. V

    Ball Joint Boots

    I tore a boot on a brand new ball joint and I'd like to replace just the boot. I've seen Energy suspension makes them but I can't tell if it fits the heavy duty A2 ball joints or not. Does anyone know or know of another company that makes a A2 ball joint boot? Thank you
  5. V

    Spindle / Spindle Nut Question

    There’s A LOT of talk about spindle nuts variations but no where does anyone I can find mention on their product or in the manuals about the thread size and pitch. I need to buy a die and chase my threads. Does anyone know the thread pitch size for the spindle
  6. V

    Geared hub question

    I’m not using CTIS and the seal parts were kind of expensive so I didn’t buy them. Mine are damaged so can I remove the ring clip and seal and leave them out or do they perform some other function? Thank you
  7. V

    Differential Question

    I need to buy a die for thread repair on the differential output shaft. Does anyone know the thread pitch of those?
  8. V

    TM Question

    I was trying to figure out the TM situation in the thread above but they closed it for comment. I went to a different forum here that said I have insufficient credentials so here we go. I bought the printed version of these three for my 2004 M1123 but found that the information I was looking...
  9. V

    Half wheel studs

    How does one remove and reinstall the studs that hold the two parts of the wheel together? Press them out on a press and then press them back in or do they come out easily?
  10. V

    Spring Compressor

    I need one and am wondering what's the best style? Internal or external? Which one do you like specifically with the source or part number.
  11. V

    Difference between models

    Does anyone know the difference between an M1123 and an M1097A2?
  12. V

    Caliper Internal Parts

    I took apart my calipers to service and paint them and found some of the internal parts damaged. I haven’t found the parts listed on any of the normal supply locations. Does anyone know where I can get the lever retainer boot, thrust screw spring shield, and thrust bearing? I’d hate to...
  13. V

    Disassemble geared hubs

    There are plenty of videos on YouTube of assembling the portal axles hubs but none that I found of disassembly. I’ve got the gears out and all the plates off but I don’t know how to get the spindle bearing off and the small gear bearings off without hurting them. Any help would be...
  14. V

    Camber/Alignment

    I'm pretty concerned about the positive camber problem for alignments. I want/need to lift mine about three inches. The tires I have are 800 each so I won't be driving around with it unless it's perfect. I find it hard to believe that taking one 1/8" thick shim out will bring it correct...
  15. V

    Rivet Information

    Does anyone know where to get the rivets used on the rear fenders that are domed with no holes in them? What kind of tool does that require? Thank you
  16. V

    Media Blasting HMMWV body

    Has anyone tried to use any kind of media to blast the CARC off their aluminum body? I know the local companies around here have several kinds of less abrasive medias like soda or walnut. I just wondered what everyones experience was.
  17. V

    Degreaser Question

    I'm going to prep a complete motor and tranny for paint and all the degreasers at the parts store say they attack rubber and plastic. Is there any that don't and preferably don't leave a residue afterwards. All the harness is off the engine so there are 40 exposed electrical fittings so I...
  18. V

    Differential options

    What kind of locker or system should I put in my differentials front and rear? I mostly drive in the street but want maximum traction for snow or off road also. I was thinking electric lockers front and rear but it may not be necessary to go to that expense. I’m not really even sure how...
  19. V

    Help with measurement

    I’m trying to design my roof and I don’t know how far to bring it down to be near a factory H1 or Humvee hardtop. Can someone tell me how tall overall a hard x door is or the vertical measurement from the top of the floor seal to the bottom of a hard top. Thanks
  20. V

    HMMWV Humvee M1123 Build Thread

    SO I got my M1123 in. I'm mechanically inclined but I haven't done much automotive work. My plan is to do something like the Predator ATVR-6 (internal cage, not exo). I'm going to Line-X inside and paint the outside satin sheen, build a cage, new bumpers, new gauges, all new wiring, brakes...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks