Search results

Hey, I was wondering if anyone would know the width measurements of the beadlock that goes in the 46" tire and the beadlock that goes in the 53" tire? I've noticed they have two different part numbers and seeing as the tires are two different widths I was just wondering if the difference is the...

Was wondering if anyone knows the flexplate number that's on the m915 truck with the Cummins 400 and Ht740? I have a Cummins big cam 350 and I have a line on Ht740 but I would need to know the flexplate number, and from what I know the 400 and 350 are pretty much the same engine other than...

Hi, I was wondering anyone knows of any other gear ratios for the 5 ton axle? Had a line on 3 axles out of the fire truck with the air lockers and 5.81 gears but the guy sold'em out from under me when someone came in with more money. Guess peoples good word don't mean s***. Anyway, I know some...

Two weeks ago I put together my HEMTT wheels and 46" tires, new gaskets, new air valves, and I put air in them and the pressure stayed. I went out today and all 7 of them were at 0 pressure and not on the truck yet. So how often do you have to fill these things? Or what could have possibly gone...

HI, I finally started putting together my tires and wheels and after I bolted together one wheel and tire and I was on my second one I realized that in the runflat that there was what lloked like a place and hole for the air valve now I've heard conflicting things on whether it's important for...

Does anybody happen to know what size tires were on the P-4 Crash Trucks?Thanks

Was just wondering if anyone would grab a tape measure for me who has an M915 would measure the height, width of the frame rail.... Thanks for any help.

Hi, I was just wondering if I replace my cam follower gasket with the same size gasket will I have to reset the timing? I've been checking the internet for the past few hours and nobody seems to give an exact answer about that. My gasket is seeping so I would prefer to just switch them out since...

I was taking the pulleys off the front of the NHc250 until I got to the one in front of the air compressor and I was wondering if it was just as simple as taking off the bolt or if there were things behind it that would fall out as well? It really was kind of hard to tell from the TM...

Hi, I have a question about the shoscks on the suspension seats.... I recently purchased a pair and I thought they were locked like regular shocks ( where you twist them out and they extend ) and they didn't extend, in fact I had to pull them out and then they didn't rebound which I believe most...

Hi, I was wondering if anyone happens to know what sizes of axle nut sockets I need to remove the hubs? I'm about to overhaul all the axles on my truck and noticed the big nuts on the end and I obviously have no socket that big.... Thanks for any help

I noticed on the 800 series bridge trucks that they have dual 49's on the rear and was wondering if anyone knows how much the weight of those dual tires and wheels affected the performance of the truck? Thanks for any input.

Hi, I was wondering if anyone who has driven a M818 would know about how much play is supposed to be in the steering box? Right now I can turn my wheel a quarter each way before it engages the tires to turn. So I was wondering if that is normal or if it's time for a new box? Thanks for any advice.

Hi, Just was wondering if anybody has the part number or would know the part number to the rear engine mounts for the M915A1? The one with the 400 Cummins in it. Changed my my bell housing over to Cummins 3016637 so now I need the mounts off that truck to make it mount to my frame. I noticed...

I was wondering if the dual MaxPro wheels are the same measurements as the stock m800 5 ton series wheels? Mainly was wondering if the offset was the same. From what I could measure my wheel itself is about 8 inches and my offset is 3 but because its still mounted on the truck its a little...

I've read on a lot of different posts here that the gap between 3rd-4th and 4th-5th is pretty bad, also have not found a suitable replacement for the tranny without serious modification to the truck. I am putting a turbo and was wondering if that will take up some of the lag in the shift points...

I was thinking about swapping out my transmission in my XM818 to a Fuller 10 speed. Was wondering if it would mate up to the NHC 250 Cummins, or if there would be any clearance issues or anything like that? Would the stock clutch pedal work, would there even be enough room between the trans and...

I was wondering what wheels come with the run-flats and what wheels don't? Also if a wheel came with run-flats do you have to put them back in? Been looking at HEMTT wheels, and also combat wheels, and I also noticed aluminum MRAP dually wheels just playing around with different size tires...

What's the best way to remove the top torque arms on the rear suspension? I can get to the mounts on the axle and remove them easy enough the problem I got is trying to get the two that go on the passenger side on the top behind the leaf spring... I could take the whole spring off but would...

Just wondering if the 14.00R20s would fit on the stock M818 11.00R20 wheel? Because the recommended wheel width for the 11.00R20 tire is 8 inches and the 14.00R20 is 10 inches would it be that much of an issue? Thanks