Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I'm having a helluva time. I purchased a "speedhut" speedo and hooked her up. Looks good works well. But this morning when firing up my m998 up my headlights don't work and my dash lights don't work? All my gauges work and my running lights work. Any suggestions, besides get rid of the...
Should the wheel valve be leaking back into the axle slowly? I cover the tube that goes from valve to axle and it will slowly build up pressure behind my thumb. It's not supposed to do that correct?
Sent from my moto z3 using Tapatalk
Running 16.00 20 in the front of my 923A2 can I use the CTIS with the hemmit rims or no? Has anyone done this? Thanks. Nevermind there is a thread on this.
Sent from my moto z3 using Tapatalk
I am in New Mexico and recently picked up a 923A2. My front drivers boot is leaking oil now and my all ctis lights blink. The air compressor is constantly running. Can I unplug the ctis and drive home? Or just deal with it? I'll m a deuce guy and don't really know the ctis system. I am currently...
For those of you who have dared to go against the grain and Bob a perfectly good 923A2 or other 900 series truck. Do you have pictures, videos, etc? It's always easier when someone else can say, don't do this, or try this next time. I need a vehicle with the agility of a Heavy duty pickup with...
My steering is easy sometimes and hard others. Seems to get better with RPM. Does anyone have the pump only. I'm thinking my pump is going bad. Fluids are good in everything else. Works fine in startup most of the time. But after it runs a while steering gets hard and or difficult. Not...
Who here has taken out your boost pump to replace the seal without removing IP? Threads? How'd you do it? I have jacks lifts heavy machinery etc.
Sent from my moto z3 using Tapatalk
I have a chance to purchase a M105A2 trailer sides bows and top from Fargo ND, and need to see if anyone is heading from there to Texas. Preferably West Texas. Thanks. Or what I need to do to get them packaged to ship. Thanks
Sent from my moto z3 using Tapatalk
Is there a seal kit for this valve or do I need to replace it? Leaking at seams like seals have rotted in the moisture of east Texas.
Sent from my moto z3 using Tapatalk
I have an m1082 and it seems the lights work but are plugged in wrong anyone got a diagram as to which number or color goes to which number on trailer wireing? Thanks in advance.
Sent from my moto z3 using Tapatalk
My power steering is all of a sudden getting hard to turn and then better and then hard again. No major leaks or anything on the outside. Is there a filter or anything in the system besides as you pour into the resivoir? Thanks in advance. I'm not even sure what is in the resivoir I think power...
What are these? They are airforce planes I'm guessing training planes. Always low and over my house. 2 or three a day. Not the best pic but it's always when I don't have my phone.
Sent from my moto z3 using Tapatalk
Just bypassed FDC. New O rings and cleaned a bunch of crap out of HH. Idles 700ish. Runs great but after running a bit and I let off throttle it tries to stumble and die before it come.right back to Idle properly. Have to pull and set throttle up a few clicks to stop stumble when I let off...
I recently rebuilt my air pack on my M54A2. Why won't my brakes release now? Seems to work fine brakes in and release air comes out tube. Everything moves correctly. A little help please?
Sent from my moto z3 using Tapatalk
Is there something like an oring I should look for here on IP pump under FDC, where throttle cable goes into pump. I am not gaining oil but have a leak of some sort on a starter cable from there. I don't need to burn it up. Also what kind of power steering fluid do you put in this type of...
I pulled my Hydrolic head out changed the o rings and the dang cover to the fuel shut off will not go back on. Is there a trick to getting the screws lined up? Do I need the stop lever to be all the way out or in? Thought I would have trouble with the HH bit that was the easy part. Help please...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!