• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. C

    2 Metal Air Wiper Motors for the M35A2

    I am looking for 2 new or serviceable metal air pier motors for the M35A2. I haven’t been able to locate any reasonably priced units. Thank you
  2. C

    Tie Rod End Removal

    I am trying to replace my tie rod ends during a front axle service and I cannot get it to come off. I tried a 14 inch pipe wrench as noted in the TM I attached, but maybe I’m not placing it in the correct place to get enough torque. I’ve hosed it down with Pb blaster numerous times as well...
  3. C

    Drum to hub safety wire help

    I’ve been looking at pictures on the site of how to safety wire the drums to hubs as it was missing when doing maintenance. I’ve never done this before and for some reason cannot grasp how it’s done in the pics/tm/ps magazine articles. Does the way I’ve done it look even remotely correct? can...
  4. C

    Front Axle Service - Ball and Claw Axles

    I’m doing my first front axle service on Deuce 1 and found I have the older style ball and claw axles. Ive learned that they use a different retainer than the newer u-joint axles. I have 2 different retainers installed. One with a flat side facing out and one with a stepped side facing out...
  5. C

    2 Hole Injector Nozzles - Great Deal

    Greetings, I am not sure if this I the correct area to share his, but I found some 2 hole injector nozzles for a great price. $4.25 each, shipping wasn’t too bad for me, added about a dollar per unit for the batch I ordered. https://real4wd.com/product/nozzle/ Hope this helps some of you guys...
  6. C

    Fuel Supply Line to Primary Filter Fitting

    I am working on replacing the copper fuel line on my M35A2 with the original primary fuel filter head mount. If I figured everything correctly here if what I think I will need to replace the primary copper supply line with new rubber fuel hose: In-tank pump outlet to filter - 3/4-18 inverted...
  7. C

    Where to send fuel injectors for service?

    I have been calling fuel injection shops and have not been able to find a shop that can clean and adjust the injectors for my LDT465 engine. Can you guys provide recommendations on shops that know how to service (and are willing to service) the LDT465 fuel injectors? Thank you
  8. C

    Throttle Cable and Engine Stop Cable Issue

    Greetings I have an issue with my throttle cable moving on its own and the idle slowly rising. I replaced the throttle return spring and cleaned and lubricated the accelerator pedal an associated linkage to no avail. I am not sure my cables are routed properly and want to confirm as I plan to...
  9. C

    Fuel Tank / Fuel Pump Mounting Issue

    Greetings! My original fuel tank developed a leak and I was able to purchase a NOS stock M35A2 fuel tank. I was removing the sealer in the moutning holes for the fuel level sender and fuel pump and it appears that only every other hole is threaded for the fuel pump mounting screws. Is this...
  10. C

    Connecting Rod Bolts and Head Studs

    Does anyone know if ARP or other aftermarket connecting rod bolts or head studs are available? I have searched their site and called, but they didnt have any product numbers in their system. Thank you
  11. C

    Injection Pump Rebuild

    Are there any service providers out there that will rebuild the Ambac PSB6A injection pump? I have a complete seal kit on hand, but would prefer a professional perform the rebuild. Thank you
  12. C

    Hard Fuel Line Leak at Hydraulic Head

    the #3 hard fuel line appears to be leaking at the hydraulic head. I've reviewed some TMs and there doesn't appear to be any rubber seal for the hard line within the head that could be leaking. Is there a rubber seal I could install to try and stop the leak or should I replace the hard line...
  13. C

    Steering Gear Box Maintenance

    I went to drain / fill my steering box with 80/90 gear oil and it appears to be full of a medium thickness gray grease. Should I leave the grease or flush it to add the proper gear oil or corn head grease? Anyway to determine what type of grease may have been used? Thank you
  14. C

    M35A2 Service in Central Florida?

    I am looking to have some work done to my Deuce, are there any recommendations of shops that know military vehicles? Looking to have my rear suspension worked on, dogbones replaced, rear trunnions serviced, new U-Bolts... the current ubolts are crumbling with rust. Thank you
  15. C

    Deuce Air Governor

    Greetings! I was thinking of replacing my air governor based on some clicking I've heard in the cab of the Deuce (the air system is building pressure to about 90 PSI). I think mine is either 1970's vintage or was replaced with a non-standard unit, because it doesn't look like the ones I've...
  16. C

    First MV arriving tomorrow! 1970 AM General M35A2

    Greetings! I have my first ex-military vehicle inbound and arriving tomorrow! It is a 1970 AM General M35A2! I will post pics once its parked and settled in... I will be scouring the forum looking for information and reaching out to forum members with questions im sure.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks