Search results

Ok this is a follow up to the clutch slipping problem I was having. I had A guy I deal with in Orlando make a 7 paddle disc and add some spring pressure to the pressure plate and now I have not been able to get the clutch to slip. It was $320. and he used the clutch hub and built the rest. I got...

I would be happy to spend the money and only take it back apart one more time. If you could pm me his number it would be great.

Yes it is old but works good.

It only slips when the fuel is turned up. There is room between the bearing and the fingers. There is 2 inches of free play. The linkage is free and not binding or rubbing.

I am not sure were the bolts or clips would go but I do not see anything. The new one was the same. This is the one I took out. It is rusty from being outside. It was clean when I removed it. I have only changed a few deuce clutchs so not up to speed with them. I change A lot of 15.5 double...

No there were no bolts.

No the flywheel was fine I turned it myself. When it slipped I pulled it and turned it with a 36 grit wheel to give it some bite. The last time I had it out I tryed A new flywheel that I had.

I changed the trans oil but I have had the trans back out since then and everything was dry. I checked the new clutch and it had seated to the plate and flywheel.

The fingers clear and the free play is good. It will not slip until I get it into the torque curve about 1800 -2300

I am pretty sure that the 2 that I tryed and good. I will look through spicers clutch book and see what I can find that might work.

Ok thanks.

That is the disc that I put in. It had the round one. I was talking about the pp. with 4 fingers. I guess I did not understand.

No it had a 4 finger and I replaced it with the same. It could be possable a better plate would fix it. I am willing to try anything. I did not know there was anything else.

I have a lds that we have flowed the injectors and turned up the pump and can not get the stock clutch to not slip. I have had it out and replaced everything with new, turned the flywheel had it back out and can not get the clutch to stop slipping in the top 2 gears under hard axcelaration. I...