Search results

you may be able to find a taller pipe thread plug that may have wider threads at the top than your current plug and hope to get it tight and seal as long as it will not contact the internal differential parts. diff cover plugs are usually 3/8" or 1/2 NPT and easily found at hardware stores...

Sounds like you have had a rough time with this. I can tell you what we did here to my personal M998. As I recall there is only 1 bolt on each differential that is preventing the cover from coming off. We took a carbide burr and made some clearance on the caliper bracket for the bolt to come...

The HMMWV uses 1/4 ton axles the same ones used in a Jeep CJ7 and I think some AMC cars from about 76-86 and they are problematic in them. also with all the upgraded A2 add on bumper, bracing and reinforcement plate options I still think it's limited to about 4k towing capacity.Most...

Waiting on an online source to get their 24 volt lights in stock that mimic the OEM H1 setup then I will install it. It had a cheesy light on it when I purchased the vehicle I did not want to put back on I do not drive at night

I made something quick for mine out of aluminum angle and I have the factory civilian style but 24 volt light on order with the protective cover plate. I drilled and tapped some 3/8 holes into the top of the air lift bumper Personally I did not want my tag hanging below the bumper I will be...

Thanks NormB for the help installing the rear bumper Basically we have the Hunter GSP9700 road force balancer I used the adapter set that is specified by Chrysler to balance their wheels and I think GM and Ford also suggest the same adapters most shops will not have this adapter set as it...