• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. Bill Nutting

    M1088 camper conversion

    A water pressure regulator is a must in my opinion. I paid something like $65.00 for one from e-trailer.com. They have a veriety of them some are fixed pressure. Mine is adjustable and has a pressure gauge. I figured if it saves my plumbing once, it was cheap insurance. BTW, if you use a Flojet...
  2. Bill Nutting

    M1088 camper conversion

    Ckouba, Just to give you a point of reference. It took me a little over two years to build out my M934. I had some help with a lot of it. I did the finish work and mechanicals by myself. I didn't have to build the box. Based on what I started with and what you are doing from the ground up, I'd...
  3. Bill Nutting

    M1088 camper conversion

    I used fuse it a lot on my build. Three years later and two trips across America, sometimes on rough roads, and no failures. It seams to work just as well in cold temperatures. I highly recommend this stuff.
  4. Bill Nutting

    M1088 camper conversion

    Hey TJ4man, Welcome to the site... When I saw your avitar I thought you stole mine. :) Turns out we just have the same truck. I converted mine to a motor home. I took a couple years working on it after work and on week ends. It continues to be a work in progress but I am able to live in it. In...
  5. Bill Nutting

    M1088 camper conversion

    Does it run?... :D
  6. Bill Nutting

    M1088 camper conversion

    Great news! Now for the build. Onward and upward...
  7. Bill Nutting

    M1088 camper conversion

    When I bought my truck it had been sitting for eight years. It had 5,000 miles on it. All ten radial tires had flat spots. I tried to use inflation changes and drove it around for a year. It shook so bad, it would almost take the wheel out of my hands at 45 mph. It would be tolerable above 50...
  8. Bill Nutting

    M1088 camper conversion

    If I could offer one word of advise. Be careful how much weight you add to this truck. I’ve seen these campers built too heavy and the rear end sags. Use as many light weight materials as possible. When I built out my M934, I removed about 2,500 lbs of stuff (all the expansible parts). After...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks