Search results

Mine did the same thing when I got it. I only found out because my wife followed me one day. It is a pretty easy adjustment, just a lot easier with a second set of eyes so you can adjust and test till it works as you want. Sent from my iPhone using Tapatalk

When you go through Mobile how far you going? I’m right off I-10 and Avalon (exit 22 after the bridge) Sent from my iPhone using Tapatalk

Got her STUCK!!! Now I'll be taking the hubs covers off today to drain and fill with fresh grease...

Not sure if this will help you too much or not, but the person I purchased mine from had mounted my speaker bar in the space behind the B pillar so here are a couple pictures on how it was done. This may give you some idea on how you can mount between the windshield and B pillar...

Put her to work this weekend. Ended up hauling 2200 pounds of yard debris and at the dump had to do it through a lot of soft dirt with no issue. Only issue I had was waiting in line almost an hour to get back out of dump sitting there in the hot sun with no AC or shade! Sent from my iPhone...

Wrapped mounting bracket for gas can in paracord and it stopped the rattling Sent from my iPhone using Tapatalk

Went for a long ride in the woods on the local base. Sent from my iPhone using Tapatalk

Went out and got some fresh air. Sent from my iPhone using Tapatalk

I keep my pistol in my ammo box next to me if I do not have it on my side (the one with the lock on it in the picture). It has foam in it to hold my pistol along with three extra magazines. Sent from my iPhone using Tapatalk

Any suggestion on getting it out? I tried a speed out, but no luck. Not a lot to grip since it was mostly hollow inside.

My question is how important is that part? I'm asking because when I went to change mine out mine seared off flush with the engine block and I have yet been able to be able to get it out. I have not noticed any difference in the way it drives without it, but am curious if it is going to cause...

Funny thing was I had just made it through all the difficult stuff and back onto the main forest road when he stopped me and when he was done he said that even though I’m at the end of the trail, he didn’t think I’d fit due to my width so I needed to go back the way I just came. He wasn’t...

Took my son out on some trails. Turned out that one of the trails were closed (ugh). Luckily forest service let me off with a warning after talking to me about the HMMWV for about 30 min. Anyway, a few pictures. Sent from my iPhone using Tapatalk

It really IS nearly impossible with something up there (but it can be done)… one of the hinges on my hood will not come out so I had to do mine with my hood on and that was a nightmare! This is the reason that I do not want to take it back off right now. I need to get to the hose that goes to...

I had some big holes with wires coming through them in mine as well. I plan on putting grommets in, but in the meantime I used liquid electrical tape to fill the holes and keep the wires from rubbing. Working great. Keeps the big splashes out when playing in water. Sent from my iPhone using...

Installed a backup light... Wired it to a multi switch so I have room for additional items to come later. Sent from my iPhone using Tapatalk

Got a ride back home... now to figure out if I fix my engine or replace it. Either way I’ll be out of commission for a while. https://www.dropbox.com/s/othffgf4lj87xm5/HMMWV%20engine%20noise.m4a?dl=0 Sent from my iPhone using Tapatalk

Pics? Sent from my iPhone using Tapatalk

Went to do some troubleshooting on my blackout light to see why it was not working. It was an easy diagnosis once water started coming out of the screw holes as I loosened the screws. Then this is what I found... Not even anything to hold the bulb left in there.

I basically did the same minus the plywood. Just set it on the tray, marked the ammo box where wholes already were on tray drilled ammo box and bolted it on. Sent from my iPhone using Tapatalk